Mercedes Vito P2364

[Perryking]

Hi, anyone can help me with this code?

Vito 115 CDI, ecu EDC16C2

P2364, won't crank and won't start.

Its ecu damage?

Thanks!

[alektkac]

P2364 Engine electronics - internal fault

[BraLaas]

Hi, anyone can help me with this code?

Vito 115 CDI, ecu EDC16C2

P2364, won't crank and won't start.

Its ecu damage?

Thanks!

Good day friend..
You found the fault..??
Have one with exactly the same problem

Thank you

Sent from my HUAWEI CAN-L01 using Tapatalk

[alexandrosts]

I would check fuse box under the hood if nothing found there then the usual issue immo problem between ecu and immo box try immo off or immo repair

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[BraLaas]

I would check fuse box under the hood if nothing found there then the usual issue immo problem between ecu and immo box try immo off or immo repair

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

What test should I do first..??
Have checked fuse box in hood already and everything looks good..
I do hear an sound like the engine fan is running by very softly from fusebox area??
And I do have alot of faults where there is no communication with other ecus..?

Help would be much appreciated friend

Sent from my HUAWEI CAN-L01 using Tapatalk

[alexandrosts]

First thing I would do is check fuses and power relay, second check all connections between ecu and immo box check pins as well not only continuity, and power and grounds, if you make sure that all this are good then you need to repair your immo data between immo box and ecu , or immo off would be a very good solution, and the last but kind of expensive if you can't figure out is buy a full ecu set , but you must make sure that your connections pins and power and grounds are all good

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[BraLaas]

First thing I would do is check fuses and power relay, second check all connections between ecu and immo box check pins as well not only continuity, and power and grounds, if you make sure that all this are good then you need to repair your immo data between immo box and ecu , or immo off would be a very good solution, and the last but kind of expensive if you can't figure out is buy a full ecu set , but you must make sure that your connections pins and power and grounds are all good

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

Do you have Immo off solution for me please
95320

Sent from my HUAWEI CAN-L01 using Tapatalk

[alexandrosts]

Yes please read eeprom on ecu an immobiliser box and post them here

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[BraLaas]

Yes please read eeprom on ecu an immobiliser box and post them here

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

Where is the immo box located on this model..??
For immo off solution

Sent from my HUAWEI CAN-L01 using Tapatalk

[BraLaas]

My Vtio does the same as the one on this link,
https://www.youtube.com/watch?v=7rIeJR2BZlQ
tried to use translate to get some info but did not help
please guys if you can help me

thank you

[alexandrosts]

To find immo box must remove cluster , it should be under the cluster on the (R) side


Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[PierreTheron]

To repair this vehicle i am next to ask

Regards

[BraLaas]

I dont see immo box only this

Sent from my HUAWEI CAN-L01 using Tapatalk

[BraLaas]

I dont see immo box only this

Sent from my HUAWEI CAN-L01 using Tapatalk

All it does..with no crank

Sent from my HUAWEI CAN-L01 using Tapatalk

[alexandrosts]

I apologise for it I did not pay attention on the year or the pics there is no immo box for this car ezs and ecu that's all

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk