nissan qaskai key add problem dont start

**drugowaz** · 18th October, 2017, 05:49 AM

Pin i read by obd. Its accepting it. As i get old and new pin. If i use new. It wont accept. Old is accepted. I also noticed that central locking dont work. No from remote. No in.button inside car. If i push button neah handbrake dash just bep 2 time but central not work.
As i said and uploaded video. This key immo ant smart function is separate and programs separately. When i program chip i dont hold remote in car.

**drugowaz** · 18th October, 2017, 05:51 AM

If car is in leaning mode. How to leave it aftrr add key?

**darox2005** · 18th October, 2017, 06:35 AM

That the problem , your tools is bad for this Car i know some nissan can do with SKP900 but is some problem add for Qashqai , get G SCAn 2 itS the best for Asian also for Hyundai and KIA very good tool ,

**drugowaz** · 18th October, 2017, 06:57 AM

ok got it will now for future.
bcm and key id ive read dump again after many atempts its shows same only 1 key. pin 2292
https://imgur.com/a/HlWiE
dump addind too
1 dunm nissan is old,but after problem occured.
second nissan ssss is read today after many atempst to add by obd

**drugowaz** · 18th October, 2017, 06:59 AM

i see this g scan 3000 + k
https://autoworkshopsupplies.com/pro...make/g-scan-2/

**Cr4nky** · 18th October, 2017, 07:12 AM

GScan TAB is now available and represents a cheaper option.

**drugowaz** · 18th October, 2017, 07:26 AM

maybe link?

**rapidlocksmiths** · 18th October, 2017, 10:19 AM

https://www.hickleys.com/diagnostics/gscantab.php

**drugowaz** · 18th October, 2017, 11:57 AM

Maybe pcf7936.must be precoded before add by obd?

**drugowaz** · 18th October, 2017, 12:00 PM

although i scanned 5 chips i tried to add by obd or dump. they all recognized as nissan pcf7936 and all has same id. scanned with handy B

**rapidlocksmiths** · 18th October, 2017, 12:24 PM

advanced keys have some info on their site stating

** Note ** It is essential when programming this remote it is inserted into the ignition with the buttons facing down and the emergency blade pushed fully into the ignition. See additional product pictures for more information.

pictures available here http://advanced-keys.co.uk/AKRM125

**rapidlocksmiths** · 18th October, 2017, 12:28 PM

is it pcf7936 or 7946 in the oem key

**drugowaz** · 18th October, 2017, 12:44 PM

Pcf7936

Im programming chip first not remote keyless. Its programmed separately rke.

**kronk92** · 18th October, 2017, 12:46 PM

the problem is even the ori key can't be reprogrammed so can't be a transponder problem, maybe dump corrupt now

**drugowaz** · 18th October, 2017, 12:56 PM

Ive checked dump key maker accepts it and shows 1 key. I uploaded dumps few posts earlier.
And every new pcf7936 i tried to add by obd or dump. Every chips shows same id.