You must have ad100pro, or tmpro2
You must have ad100pro, or tmpro2
or abrites , or zedfull even
Uh, I havent any of this tools, I have SKP900, zedbull clone, multiecuscan original, willem programator, carprog clone..., but nothing so expensive. In the next one or two month I plan to buy a tango original.
tango will not do, transponder yes, not remote control
a cheaper alternative when you have a machine capable of precoding a remote from dump . is truecode with the fiat licences , but tool capable of precoding remote from dump is needed to precode the key from dump read with truecode by obd , if you dont have any of the kits mentioned in the thread then options are limited to either passing job to someone with kit who can precode it , or order dealer key if you have a unit that can program it.
Last edited by rapidlocksmiths; 22nd October, 2017 at 12:49 AM.
Since my questions are similar I'll add on here instead of starting a new thread. I recently acquired a 2014 Fiat 500e. I believe I have a similar remote/key problem. My understanding is that one wants to add remote keys like this:
That the remote must be precoded. However, from reading above that a transponder only key such as:
is not in fact precoded. So does that mean that if I have a working remote key, that I can use a tool like a Zed Bull mini to configure a couple of transponder only keys?
Next question: If can accomplish the above, does then losing the remote key cause a "last key lost" situation? Or is the car usable with transponder only keys?
Final question: What is the cheapest option for adding a second remote key? Again from the above it seems like all the options are expensive.
Any help would be greatly appreciated.
ga2500ev
a similar questions and from me...
I have a simple key for Fiat g.p (no remote) can i programming new key with remote? and how?
you can upload your Dumps?
excuse my English, is the best.
currently the only tools that have good coverage on adding a remote control to these via obd is , Abrites , Zedfull , AD100 pro , MVP pro and truecode with the aid of a good dump tool like tmpro .
some other tools may be able to code a dealer precoded key , truecode can , if the keys sourced and precoded from the dealer then true code can code this in via obd without a dump tool .
there isnt currently a cheap tool to precode and code these by obd , nor is there many dump tools that will prepare the remote either .
as has been said , if the tools that can do this are too dear , then sub it out to a locksmith with the kit to do it .
if only wanting to make clone standard non remote keys , then most cloners that can clone id46 can do this .
Meybe someone has io terminal and calculate remote data for me.
Grande 2009
rapid is right, wondering that the tango of this hole did not patch, Tango oki
Bookmarks