Test and report mate
Test and report mate
Is that a burned eeprom ?!
Your file is the same as the original.
I test this file,and dont´work. Someone have solution. Thanks.
sorry, wrong file
Is that a burned eeprom ?!
your file, is same ecuvonix. Don´t work. I test four file immo off, and nothing.
Something is curious here....
Is that a burned eeprom ?!
alcorte (23rd October, 2017)
I think than I broke the ECU. Because I have tried all the solutions and none works. I have also put the original file in the original car, and it does not start. as if he does not have an ecu. If you remove the ECU and give the contact does the same. But if you write in the eeprom
Last edited by alcorte; 23rd October, 2017 at 08:56 PM.
try vcds and see if you can look in the ecu
Is that a burned eeprom ?!
or try to buy new eeprom end reflash whole ecu with ori files
I can read/write eeprom with ktag. And it is all ok. tomorrow i try read with vcds or delphi. But I think than ecu is break.
Have you tried reading the flash ? On ignition do you have glow plug and engine check light?
Yes. I can read all. Flash, micro and eeprom. And I can write perfect. But te car dont Star, is dead, with the ori file same.
M8, my suggestion is that you make in the first place a diagnosis to see what is going on with your car...
Bookmarks