I found it .... if someone need it - here You go...
RNEG from 2010y. maps on SD.
Display shows only "System check in progress. Please wait and do not switch off the engine for 25 min."
Engine can run even all day and system won't start.
In firmware R50 we can find folder EMEGGENCY_KIT with files to load it up, even with instruction in PDF.
But there is no instruction how to connect to mainboard. RNEG mainboard has plug on edge.
I'm sure we can do it with RS232 but I need pinout to mainboard plug...
Does anyone can share solution?
If my solution helped You - do not forget to THANKS !!!
I found it .... if someone need it - here You go...
If my solution helped You - do not forget to THANKS !!!
adjee (15th February, 2019), axl (13th November, 2018), Col19 (22nd December, 2021), Epap (17th February, 2019), freeman2014 (12th September, 2019), g485 (28th May, 2018), glk96000 (8th November, 2019), gsmflasch (25th July, 2022), ilkovelichkov (13th May, 2021), juned2 (12th September, 2019), laki23 (19th July, 2022), mexanico1971 (20th July, 2023), michael 28 (7th January, 2018), norishor (16th February, 2021), PetShakal (4th December, 2022), ruemzaigc (28th February, 2024), sikib (10th November, 2018), sozeri (10th February, 2018), swissdriver (30th May, 2020), Weld hammadi (19th October, 2020), xdamdamx (2nd January, 2019)
hello friend has more information with this procedure. What soft do you use and so on? or who has that kind of information?
On firmware CD is folder "Emergency kit" with TUTORIAL in PDF. All You need is:
1. USB RS232
2. TUTORIAL which is on CD
3. TerraTerm terminal which is in Internet
If my solution helped You - do not forget to THANKS !!!
armpower (20th February, 2018), audiopoint (14th February, 2018), BusCan (24th September, 2020), Col19 (22nd December, 2021), eric paris (31st July, 2020), Faraday (3rd August, 2019), g485 (6th June, 2018), girolamodisidisi (26th October, 2022), glk96000 (8th November, 2019), gsmflasch (25th July, 2022), hrmotorsport (10th April, 2018), ilen (10th August, 2018), laki23 (19th July, 2022), Latuachiave (19th September, 2023), matik185 (12th March, 2019), mexanico1971 (22nd March, 2023), mido007 (26th June, 2019), norishor (16th February, 2021), npero (26th January, 2024), PetShakal (4th December, 2022), RadioChiP (19th August, 2018), sikib (10th November, 2018)
once restored is needed code with lexia?
and, whaat cd is needed, original comes with car? if dont have this cd, how to do?
thanks
All You need is firmware, which You can download from NET.
If my solution helped You - do not forget to THANKS !!!
Martech Programmer that repair this unit
hi have you got the firmwere please i have same problem thanks
hi, who have sucesseful fix the rneg?
im trying, but i dont know what im doing wrong, i can do comunication with radio, apear rneg script, but i can ZR, is always says erasing....
Hello
Many people as me in France have a specific trouble with the RNEG 1 (harman Beker) unit and some others have also this trouble with the RNEG2 (Magneti Marelli): these units are working well but reboot at regular intervals (every 30 mn for mine)
I can understand that the trouble comes from a eeprom being corrupted (why?... no idea as I am just a normal driver)
Repair consists probably in re writing the eeprom after clearing it (I am not sure) but costs a lot (600 € through Citroen network and that is unacceptable for just flashing an eeprom)
Does anybody know wether using the Reanimate Your RNEG procedure found on the update firmware files would solve the reboot trouble?
Thanks for your suggestions or now how
Thanks for the idea
I thought as you that the update could help but unfortunately after updating the firmware the undesired periodic reboot was still there.
I would like to try to investigate through the serial communication but currently i am not able to understand this kind of programmation ..
Will see
i have martech box 3 , i connect with rneg but i have this problem
when i clic on emergency start i have this message:
Connecting...
------------------------------------------------
Error. Connection failed.
why the rneg does not accept the update ?
can you help me how to resolv this problem
thanks
Last edited by talel66; 25th March, 2019 at 06:29 PM.
problem solved
her (4th November, 2022)
Hello, I have a problem following the update of the firmware R50.3 which did not go through. I performed the manipulation to reanimate my rneg, but I can’t send the file "install_rnegd.ifs" by ZModem in Tera Term. In Tera Term I have this in loop :
IPL: RNEG (6426.C1/0), 300 MHz
[ver.10325A, built 2010-08-13 10:35:16 1931854]
CS0: NOR
boot img #0 from NOR [FPGA missing]... --- loaded 4907 KB in 649 ms [3552 => 7743 K/sec]
*** jumping to c0200bc0 ...
Startup: PL_qnx_startup-atlas2_07241A, built 2007/06/11_14-47-38_UTC
Board: 00006426.000000c1
RAM: 124 MB
FLASH: 64 MB @0x10000000
cpu_clock=300000000, dsp_clock=200000000, sys_clck=100000000, io_clock=100000000
Dcache: 512x32 WB
Icache: 512x32
arm926 rev 4 300MHz
System page at phys:c0017000 user:fc404000 kern:fc404000
Starting next program at vfd0203a8
Unknown type 255
Shutdown[0,0] S/C/F=11/1/11 C/D=fd005fd0/fd05c060 state(c0)= now lock
[0]PID-TID=1-4? P/T FL=00019001/05020000 "proc/boot/procnto-instr"
armle context[fd06694c]:
0000: 00000011 0000000a 00000064 00010000 fd0905dc fd54ccf8 0000ffff 00000000
0020: fd0014c8 00000010 fd059488 fd552f24 fc423000 fd552eb4 fd024160 fd001834
0040: 6000001f
instruction[fd001834]:
03 20 f5 e7 01 30 d5 e5 03 64 92 e1 c0 ff ff 1a 01 00 a0 e3 c0 76 00 eb 00 70
stack[fd552eb4]:
0000: 00000000 6f72702f 6f622f63 7000746f 6e636f72 692d6f74 7274736e 00000000
0020: 00000007 fd05bff8 00000000 00000000 00000000 00000000 00000000 fd049f00
0040: 00000000 00000000 00000000 00000000 fd05a0d0 fd54e050 fd553008 00000000
0060: 00000000 fd552f50 fd552f28 fd04b6d4 fd0014f8 fd553008 fd54e050 fd553008
getdipclose
Can someone help me? Thank you in advance, everyone.
Bookmarks