Mazda6 P1336 fault (timing chain)

[Nanu]

Hi,
I have problem with Mazda 6 , 2.2 diesel engine, the DPF light flashing (yellow), one fault code stored : P1336 CKP sensor/CMP sensor range/performance malfunction

I checked the timing, timing chain was stretched , I changed it! after changing I reseted it with wire under boonet....

the yellow light is still flashing , the fault is the same

I checked a CKP and CMP sensor with oscilloscop, but I dont know ,if the signal is correct or no

please help me
thank you Nanu (sorry for my english)
mazda4.jpg


today I solved a problem, it was necessary a timing chain correction...

the method is:

1. Start the engine and idle it.


2. Ground the check connector terminal as shown in the figure using the jumper wire.
conector.jpg

3. Depress and release the clutch pedal and the brake pedal simultaneously 5 times within 5 s.


befor the process I made an oil change reset and fuel injection correction

the car works perfect

[Nanu]

////SOLVED////

[Abudu]

Hello,
I have same problem with mazda cx7 2.2D , but i don't find this port.
maybe who knows how to do this?

[carbyvw]

thanks, works perfect

[Werner1976]

Hello,
I have same problem with mazda cx7 2.2D , but i don't find this port.
maybe who knows how to do this?

Did you find it ?

[Rudolfek]

Hello guys. Any chance that you can give me advice where to find port on Mazda CX7 2.2diesel please?