95 Toyota Supra Zero Out

[testit34]

Hi
Does anyone Know the points to zero this supra.
The points don't match whats in the Pictures above.
The MCU is 100 pins.
Thanks

[raf0468]

the resistor that need shorting is under lcd..and so is the micro as diagram..

[testit34]

Hi
Do you know resistor value ?
The diagram says you don't have to remove LCD on the bottom of it.
I think 2 point have to be jumper not a resistor.
Thanks

[raf0468]

here is the resistor need shorting you can access without screen removal from sides..
you only short for split second..

[testit34]

Hi
Do you know the resistor value. Under the LCD is not the same. Here is the picture.
Many thanks

[testit34]

Hi
Do you remember which 2 pins on the micro it is cause the pcb is not the same as the picture you posted.
Thanks

[raf0468]

sorry cant help any further as all the ones i saw were same as i pictured..

[testit34]

Hi
Thank you

[atomiczen]

Hi
Thank you

have you solved? i have same problem here, bought a used odometer and need to program like original