Rav4 dpf off

[Kenyatech]

I need rav4 d-cat dpf off.

[rafalgt]

There is wery simple sollution.
Emulate temp sensors. Use 2 diodes (1N4004) for each senson and resistor 1k ohm for 5th injector. Diodes connect in series, cathode connect with brown cable.
Disconnect rear wavy line from diferential pressure sensor and clog it.
Thats all...

[Kenyatech]

Thanks, will work on it

[Kenyatech]

Thank you so much rafalgt. I made the emulator and the car runs fine. No smoke and no fault codes. Thanks alot.

[oneyoh]

There is wery simple sollution.
Emulate temp sensors. Use 2 diodes (1N4004) for each senson and resistor 1k ohm for 5th injector. Diodes connect in series, cathode connect with brown cable.
Disconnect rear wavy line from diferential pressure sensor and clog it.
Thats all...

Hi, can I ask you if you know the trick for a 2.5 D4D Toyota Hilux ? Engine code is 2kd Ftv and I’m facing this limp mode. I already « de-biscuited » my exhaust but not sure about the resistors location


Envoyé de mon iPhone en utilisant Tapatalk

[Scuderia123]

Im trying to do this on a Lexus IS220d (same engine)... The "wavy" hoose from diferenttial sensor is the line that reads pressure before or after dpf? And my temp sensors have no brown wires, there is other way of indentify positive amd negative wires? Thanks

[boddax]

Hi . 1000 ohm is correct value? and watts ?