Dash is not dead,just try again with digiprog and dash alive.
AUDI s3 2000cc year 2007 after klm try to change with digiprog dash dead.I need full flash
eeprom 24lc32 + micronas CDC3217G C1
AVDI DATA
VAG Number: 8P0920931C
SW version: 0570
Retrieve previous flash status and preconditions:
Programming attempts: 1
Programming finished OK: 0
Preconditions:
Ready for flashing
AVDI DIAGNOSIS
Establishment diagnostic session with selected unit ....
Diagnostic channel is open.
Device identification:
VAG Number SW: 8P0920931C 0570
VAG Number HW: 8P0920931C
System description: KOMBIINSTR. VDO H20
Workshop (Part/Imp/Supp): 2053004/0011/00000
Date of production: 26.02.07
Vehicle information:
Coding: 5118
Serial number: 2241G004004751
FAZIT identification:
FAZIT Identification: VDD-024 26.02.07 7601 0150
Flash information:
Programming APPLICATION attempts: 1
Programming APPLICATION successfull: 0
Flasher info: --.--.-- 2053004/0011/131072
Flash status: Reflash not finished
Reflash preconditions: Ready for flashing
Dash is not dead,just try again with digiprog and dash alive.
chiptuner123 (23rd November, 2017), pipina (3rd December, 2022)
are you sure did you try ever??
Many times
I do it and work thanks
Hi everyone. I have the same problem as the author of the topic. After use FVDI my clusters (8P0920931G) not work, no light and engine no start. How to repair it ? What interface should i use ? My friend advised me to use vag commander or vag dash can but i don't know if it is good idea. Thanks for helping
Last edited by killerx93; 19th March, 2019 at 03:02 PM.
Looks like your friend has no idea too. You can use digiprog, enigma, elprosys or carprog (original) to repair via OBD. Otherwise you need xprog-m to read micronas.
Bookmarks