IAW 5NR2.C5 problem after ecu swap with immo off.

[Cymbek]

Hi!

I have problem with Clio MK2 PH1, orginal ecu was IAW 5NR and it was damaged. I swapped ecu tu IAW 5NR2.C5 with immo off. Car starts and run fine, but I have a problem with A/C. The only dtc is DF145 - when it is present A/C is not working. When I clear this dtc A/C is running fine, but after ignition off and engine starts again dtc is present and A/C is not working. Maybe someone have solution for this? Here is my immo off 95160 dump.


thx
Kshin

[Pyromaniak]

I think you swaped noCAN ecu with CAN one, or you have bad configuration in ecu (you must learn ecu with can clip)

[Cymbek]

The only learn in ECU are power steering and a/c conditioning. I`ve done that and nothing changed... What is exact name of funcion in CLIP to config nocan/can ecu?

[Cymbek]

Stock ECU was IAW 5NR.CI1 and it was swapped with IAW 5NR2.C5...

[Pyromaniak]

http://www.digital-kaos.co.uk/forums...-5NR2-C5/page4

look here, they are some virgin files, try to compare with your file