CAR DON'T START AFTER WRITE KESS 5.017 EDC17CP14

[0soinsa]

already tried, only solution and repair eeprom

[icezero2010]

already tried, only solution and repair eeprom

my solution work ! test many times

[voltechcar]

writing ori be obd or use flasher to flashing this ecu frf orginal file and car start. When start use k-tag to read in boot mode or Kess vread and writng by obd.

[0soinsa]

I repeat in OBD not make ID with KESS and non function DIAGNOTIC!!!!! OBD NOT WORK!!!! EEPROM IS DAMAGED!!! SOLUTION IS REPAIR EEPROM!!!

[bobolin4o]

I repeat in OBD not make ID with KESS and non function DIAGNOTIC!!!!! OBD NOT WORK!!!! EEPROM IS DAMAGED!!! SOLUTION IS REPAIR EEPROM!!!

No need to shooting here, mate.
You are the one, who is in deep shit here...
So keep your nerves and wait until someone fix your eeprom!
BR!

[0soinsa]

You are right! I had written from the beginning of the problem is in eeprom, but all insist on writing obd and write obd ...

[lsdlsd88]

why do you think you can't flash FRF with appropriate tool if eeprom is damaged?

[0soinsa]

problem solved! one user repair eeprom and flash and car start! thank you all at partecipation!

[ikara]

have same problem,who can help me,

[icezero2010]

have same problem,who can help me,

the solution is in this topic

Use ktag make boot backup

Unlook Seriel programming write file again obd

than the ecu fix the eeprom byself its write the eeprom complete new in second eeprom

[ikara]

the solution is in this topic

Use ktag make boot backup

Unlook Seriel programming write file again obd

than the ecu fix the eeprom byself its write the eeprom complete new in second eeprom

thx.,but already solved, a friend make some file wich i write in boot mode and get diag alive again,than reflash with Odis

[gfck1]

Hi Guys!
I need your help - i tried to remap my girlfriends Audi A5 2.0tdi (143hp) (2009)....
I'm owning PCM Flash + EDC17.x module and a Kess eu version.

I wanted to read/write the car via obd - took pcm flash -> ecu id -> grabbed the correct virtual read file -> and tried before any remaps flash the stock file via obd...

Unfortunately the write process stopped during (write block1 - that was erased before) so i fear that was tprot that caused that...

Then i took out the ecu and tried it via kess bootloader - ecu id not possible, write process not possible, only a backup read for eeprom and micro was possible (saved together in one file)

What can i do? Is the ecu bricked?

Thx & BR
Chris

[Happy786786]

Hi Guys!
I need your help - i tried to remap my girlfriends Audi A5 2.0tdi (143hp) (2009)....
I'm owning PCM Flash + EDC17.x module and a Kess eu version.

I wanted to read/write the car via obd - took pcm flash -> ecu id -> grabbed the correct virtual read file -> and tried before any remaps flash the stock file via obd...

Unfortunately the write process stopped during (write block1 - that was erased before) so i fear that was tprot that caused that...

Then i took out the ecu and tried it via kess bootloader - ecu id not possible, write process not possible, only a backup read for eeprom and micro was possible (saved together in one file)

What can i do? Is the ecu bricked?

Thx & BR
Chris

X17 frf File obd should be fine


Sent from my iPhone using Tapatalk

[zxc11]

Hello gfck1,
You can write in PCM suport forum . For module 65 "VAG MED17/EDC17 CAN TP2.0/K-Line":
http://pcmflash.ru/forum/viewtopic.php?f=16&t=1098
for module 48, 50 - VAG MED17/EDC17 UDS:
http://pcmflash.ru/forum/viewtopic.php?f=16&t=212
Try write in english, if no answer- use google translator.
I think You will get help. You can recower that car with pcm flash.


Best regards,
Jordan

[Noergaard4822]

Here is test file
let me know result

Thx for the file i got to use it