PEUGEOT 206 RHY REMAP

[sonic 1989]

good file chip tune voltechcar, only make map "air temperatura limit boost pressure" and map SOI

[goyodesanctis]

Do you have PP2000 access???
No problem,normally I don't have mistakes,no problem I repeat,last week I made a 2.0 HDI RHS 307 Peugeot and everything is ok,I have raised maf limit 6x1 and calculate AFR to get not smoking.
Tell me the DTC Code and I can adjust more the file.
Regards mate

[goyodesanctis]

NO GOOD FILE.
Duration is false.A lot from 2500 rpm.
Rail pressure not modified.
SOI for high IQ not scalled an not modified.
Turbo vs IAT for more pressure than stock,keep values.
It's my opinion and nobody can make see me another thing.
Is normal that car smokes a lot.

Sorry if anyboy don't like it but it's my opinion.
If you have any eobd scanner report dtcs and take a look for injectors return line to get the same amount of diesel in 4 cyninders.This cars usually have a one or two in bad condition and this is the normal cause.ç
Check values of Rail pressure,and take a look for pressure sensor cables to ECU with multimeter.
Regards

[goyodesanctis]

Tuning specialist wanted/dont want to insult people that sent me files/ I asked for help with this 206 hdi and received three different files and tried them,yes engine has more power and torque with every file but always cuts out and stops at different revs!!!and smoke with the first one
I put back original and all is ok,i am not experienced in tuning at all,so thats why i ask somebody/I KNOW there are many professionals here/to mod this dump so that to increase power and torque without smoke,stops and so on
here are the three mod files mentioned above..

The password is the same as before.
I want you to analyze your previous words carefully.
It seems to me in very bad taste, that three people help you, and you just think that maybe we do things wrong, and I can assure you that I have made more than a hundred RHY engines even with SID 801 / 801a.
So be careful, with these words, because for less than nothing, one is sent far away, without being able to return.
I do not care about your reputation in this forum, or what you post, if you try to help me, I think the least that I can, is to be considered.
There is this said and written.
Have a nice day.
P.S.
Without obd scanner, you can not know why the car is failing.
Many times for an even quality file, the car is required to be 100% ok, and this is not usually the case of a RHY with 300k KMS.
It is preferable to find the fault, which seems slight, and then create the file correctly.
Regards