>>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

**topclef** · 28th January, 2018, 09:08 AM

Originally Posted by whiskeyman

the bit saying you will loose abs not so good

I did it without losing the ABS coding

after entering in service mode , AVDI ask if you want to write the original dump , i click yes , load the original dump ( not modified ) and write it , read immodata and .....I continue my job until the end ...al is ok .

**lmqcatarino** · 28th January, 2018, 01:09 PM

Hi.
I'm a new Avdi user.
Already program some BMW keys, but I have now a F series keyless to program.
It's a 220D year 2016. F22.
I didn't connect Avdi to car, I still don't have that kind of keyless.
But I go to BMW software and only see F20 series.
The question is. Can Avdi program F22 keyless?
Where I can buy that kind of keyless?

Enviado do meu MI 6 através do Tapatalk

**topclef** · 28th January, 2018, 01:26 PM

take a look here , to know how to play with this toys ....
https://www.youtube.com/watch?v=GjqNdWXHTQg

**topclef** · 28th January, 2018, 03:10 PM

Originally Posted by ps80l

Did anyone else noticed the Toyota 11.3 update on the site? It had a lot more features before. They removed most of the features and just left a few that most other machines can do already..

they have not removed anything

http://www.abrites.com/news/news-abo...n-version-11-3

http://www.abrites.com/news/news-abo...s-version-11-3

only difference are the details ...

**lmqcatarino** · 28th January, 2018, 04:06 PM

Originally Posted by topclef

take a look here , to know how to play with this toys ....
https://www.youtube.com/watch?v=GjqNdWXHTQg

Thanks. I already watched that video. It's a F20, and it's about all lost keys.
It's not necessary that procedure with working key, right?
And F22 program like F20?

Enviado do meu MI 6 através do Tapatalk

**topclef** · 28th January, 2018, 04:23 PM

[QUOTE=lmqcatarino;3200955]Thanks. I already watched that video. It's a F20, and it's about all lost keys.
It's not necessary that procedure with working key, right?
And F22 program like F20?

Procedure for all FEM-BDC , in your case you don't need to read ISN from ECU if you have working key , but the whole procedure is the same

**clearly** · 29th January, 2018, 01:21 PM

Regarding NEC lost keys read eprom first
Then make on bench

Pictures are in User Manaul

**gttuning** · 29th January, 2018, 07:05 PM

Hi all..
Trying to prepare pcr2.1 fabia 2012.
I have no ori instrument cluster so im trying to pull cs pin.....from ecu...
Data procesing over internet is ok but i have flashing error...
Would that be because of key not match to cluster and immo active is stoping to flash ecu...r some problem with abrites.?
Maybe program key first and the learn ecu?

Sent from my SM-G935F using Tapatalk

**solitaire** · 29th January, 2018, 11:11 PM

No need key, for pcr2.1 flashing.

**gttuning** · 29th January, 2018, 11:32 PM

Originally Posted by solitaire

No need key, for pcr2.1 flashing.

Every time i had to replace clocks i had the old once so i could see pin..cs......
This time no clocks and i have problem to prepare ecu..so i can see pin.cs.mac.
Will try again tomorrow.i think last time i had skoda i had to do it on the bench for some reason,i think there was some problem aswell.

Sent from my SM-G935F using Tapatalk

**gttuning** · 29th January, 2018, 11:49 PM

Originally Posted by whiskeyman

the bit saying you will loose abs not so good

Transporter 2012 vdo...did option 1 loose abs coding..but abs was ok didnt loos any coding at all.

Sent from my SM-G935F using Tapatalk

**gttuning** · 30th January, 2018, 03:09 PM

Yo guys any one recently try pcr2.1 preparetion.i have failed by obd and on bench?data process ovrr internet ok but once is trying enter bootloader message comes up flashing fail.
Thanks......

Sent from my SM-G935F using Tapatalk

**topclef** · 30th January, 2018, 03:51 PM

Have you unlocked PCR2.1 using direct boot mode or by eeprom ?

your AMS valid ?

**gttuning** · 30th January, 2018, 04:23 PM

Originally Posted by topclef

Have you unlocked PCR2.1 using direct boot mode or by eeprom ?

your AMS valid ?

Its working

.
Had a chat with suppprt and by AlekN advice its flashing now ok...
If any have a problem like this in future wait 15 min.after avdi will find Vag number and current sw. Then press prepare....and will work..
Thanks support for quick response.

Sent from my SM-G935F using Tapatalk