Register
Page 1 of 258 1234561151101 ... LastLast
Results 1 to 15 of 4016

Hybrid View

  1. #1
    Moderator
    PremierD's Avatar
    Join Date
    Jun 2009
    Posts
    12,463
    Thanks Thanks Given 
    2,633
    Thanks Thanks Received 
    9,134
    Thanked in
    4,302 Posts

    Default >>>>>NEW AVDI PROBLEMS AND SOLUTIONS ONLY THREAD<<<<<

    LET'S GIVE THIS ONE MORE TRY ....

    So this is how it will work ..

    Post a problem one at a time, specifics of that problem (no cheats liars fannys or fuds.) in the decription.. then we wait till we get a reasonable reply or in fact, a solution to that particular problem .

    If it gets out of hand then we will not have a thread at all (which may suit Arbrites) but who knows, maybe they are not as full of shit as has been suggeted

  2. The Following 27 Users Say Thank You to PremierD For This Useful Post:

    abdelamjid (11th March, 2018), CaioW (17th January, 2018), daxxer (17th January, 2018), doctore (17th January, 2018), dooshan (17th January, 2018), ecuhamed (25th May, 2022), Fallen (17th January, 2018), gttuning (17th January, 2018), hass42 (20th April, 2018), i-vtec (17th January, 2018), isma123 (20th January, 2018), Johnner (19th January, 2018), luiyitox (26th November, 2019), Mario3 (20th January, 2018), norman1967 (23rd January, 2018), offsystem (17th January, 2018), p1et (17th January, 2018), pepi (17th January, 2018), phananhtu (7th May, 2023), rapidlocksmiths (17th January, 2018), skinsh (10th December, 2023), smokey08 (17th January, 2018), super jumbe (21st January, 2018), tizi94 (17th February, 2020), topclef (17th January, 2018), ttzag (21st January, 2018), zlatinou (18th January, 2018)

  3. #2
    DK Veteran

    Join Date
    Oct 2009
    Posts
    301
    Thanks Thanks Given 
    67
    Thanks Thanks Received 
    142
    Thanked in
    87 Posts

    Default

    OK. Lets try...

    FIRST PROBLEM.
    AVDI compatibile with Tech2 - not working SPS from GlobalTIS - when i start SPS - proces don't start but my hard drive starts to fully, on disk is written log files which grows... some update before this function works OK.

  4. The Following 5 Users Say Thank You to i-vtec For This Useful Post:

    doctore (17th January, 2018), luiyitox (26th November, 2019), PremierD (17th January, 2018), ps80l (19th January, 2018), tizi94 (17th February, 2020)

  5. #3
    Senior Member
    obdsystems's Avatar
    Join Date
    Oct 2013
    Location
    U.K, not the E.U.
    Posts
    2,054
    Thanks Thanks Given 
    1,067
    Thanks Thanks Received 
    497
    Thanked in
    389 Posts

    Default

    Quote Originally Posted by i-vtec View Post
    OK. Lets try...

    FIRST PROBLEM.
    AVDI compatibile with Tech2 - not working SPS from GlobalTIS - when i start SPS - proces don't start but my hard drive starts to fully, on disk is written log files which grows... some update before this function works OK.


    I did have it running but to tell truth, but rather not use AVDI as pass-thru

    so many cheap ones off ebay -tend to use em instead
    I am a FUD

  6. The Following User Says Thank You to obdsystems For This Useful Post:

    isma123 (27th May, 2018)

  7. #4
    Member

    Join Date
    Dec 2009
    Posts
    80
    Thanks Thanks Given 
    4
    Thanks Thanks Received 
    20
    Thanked in
    14 Posts

    Default

    WHat global tis you use?
    I use it with V32 and work normal.
    You have comunication with car when open Tech2WIn?

  8. The Following 3 Users Say Thank You to wintesla For This Useful Post:

    pepi (17th January, 2018), PremierD (17th January, 2018), tizi94 (17th February, 2020)

  9. #5
    DK Veteran

    Join Date
    Oct 2009
    Posts
    301
    Thanks Thanks Given 
    67
    Thanks Thanks Received 
    142
    Thanked in
    87 Posts

    Default

    Yes i have comm. and also use v32. This is very strange because if i select on device list a real Tech2 (i have original) sps starts normal, when i select AVDI it's detect VIN and software version in ecu but when shows % is always 0 and my hard drive starts to fully, on disk is written log files which grow (as i say before).

    My friends also report when use online version TIS also not compatybile anymore.

    I think about 2 years was good and works very well - now i and few of my friens have this problem but i'm not 100% sure is this isue is of all ecu types.

    NEXT PROBLEM.
    In Opel software from about 3 years in Astra J with EDC17 i's impossible to erese errors - i test it on few of astra j and never worked erase errors. If i use avdi as mdi i can read and erase errors in this car - so i think this is only a software bug in opel software.

  10. #6
    Member

    Join Date
    Dec 2009
    Posts
    80
    Thanks Thanks Given 
    4
    Thanks Thanks Received 
    20
    Thanked in
    14 Posts

    Default

    This is strange
    when not have comunication with car trouh Tech2Win then is problem like you describe.
    I use Globaltis minimum one time on day and not have problem.
    Next question
    Global Tis 32 what version? My is 32B.
    What windows use or is instaled on VM? I install on VM
    with WIN7 32bit , Explorer 8 and Java ( i not remember version ,i can chek and write you)
    What device chose from list when go to sps
    Abrites or mdi?

    For SPS have note from GM to use Tech2 on every car where you can ( on older car).
    Sometime have problem with Mdi, and some time.have problem with avdi ( when finish reprograming start again to reflash.So must manualy turn key to stop when programing is finished and you get chek light on dash)
    This is only problem what i know and what i have from time to time.

    About Astra J - open avdi sw conect to car with edc17
    read and write error .Close and send log file to your dealer.If you not.get answer from your dealer in 2 working day, send me log file.
    Last edited by wintesla; 18th January, 2018 at 07:59 AM.

  11. The Following User Says Thank You to wintesla For This Useful Post:

    rapidlocksmiths (18th January, 2018)

  12. #7
    DK Veteran
    whiskeyman's Avatar
    Join Date
    Dec 2010
    Location
    where men are men and women eat their babies
    Posts
    2,118
    Thanks Thanks Given 
    768
    Thanks Thanks Received 
    947
    Thanked in
    573 Posts

    Default

    Ok so this my fails this week with avdi

    Passat b4 2004
    avdi freeze screen when try read pin

    kia ceed diesel yesterday
    2012 try to read pin for spare
    failed

    will list as I go this week

  13. The Following User Says Thank You to whiskeyman For This Useful Post:

    doctore (19th January, 2018)

  14. #8
    Member

    Join Date
    Dec 2009
    Posts
    80
    Thanks Thanks Given 
    4
    Thanks Thanks Received 
    20
    Thanked in
    14 Posts

    Default

    Quote Originally Posted by whiskeyman View Post
    Ok so this my fails this week with avdi

    Passat b4 2004
    avdi freeze screen when try read pin

    kia ceed diesel yesterday
    2012 try to read pin for spare
    failed

    will list as I go this week
    You mean B5?
    99% problem is in sw
    Ask from your dealer new sw
    For Kia must wait Alek or Ventzy to aswer.

  15. #9
    Banned

    Join Date
    Feb 2017
    Posts
    103
    Thanks Thanks Given 
    33
    Thanks Thanks Received 
    101
    Thanked in
    47 Posts

    Default

    Quote Originally Posted by whiskeyman View Post
    Ok so this my fails this week with avdi

    Passat b4 2004
    avdi freeze screen when try read pin

    kia ceed diesel yesterday
    2012 try to read pin for spare
    failed

    will list as I go this week
    Regarding the Passat - please check the connection between AVDI <-> OBDII. This is most common reason for this behavior of the software. It happened to me yesterday with an Audi A4 B6.
    Regarding the Kia Ceed - according to me the model is not supported as our coverage is at the moment limited talking about models after 2012/2013, we are aware of that and currently working hard on it. We just updated our PassThru driver for some OEM software as Kia GDS 2017 and Huyndai GDS 2017. Next step would be to update the coverage of the models.

  16. The Following 2 Users Say Thank You to ventzy For This Useful Post:

    rapidlocksmiths (23rd January, 2018), whiskeyman (24th January, 2018)

  17. #10
    DK Veteran
    whiskeyman's Avatar
    Join Date
    Dec 2010
    Location
    where men are men and women eat their babies
    Posts
    2,118
    Thanks Thanks Given 
    768
    Thanks Thanks Received 
    947
    Thanked in
    573 Posts

    Default

    xxxxxxxxxxxxxxxxxxxx

  18. #11
    DK Veteran

    Join Date
    Mar 2017
    Posts
    393
    Thanks Thanks Given 
    62
    Thanks Thanks Received 
    113
    Thanked in
    82 Posts

    Default

    GM global connect website always fails when I do SPS...starts fine but seems to slow down and does not finish. Always end up using dedicated J2534 adapter.

  19. #12
    V.I.P. Member
    Fallen's Avatar
    Join Date
    Dec 2009
    Posts
    2,290
    Thanks Thanks Given 
    1,527
    Thanks Thanks Received 
    1,447
    Thanked in
    628 Posts

    Default

    When using VW software and you find 6 bytes from the ECU and 7th byte for a working key, it would be nice if you could just press program and it will write all the bytes to the transponder.
    At the moment, once you have found the 7th byte, you then have to manually select "all 7 bytes known" and then manually transcribe all the bytes into this field.
    It's a painful process and if you get 1 of the 14 digits incorrect, its all over.

  20. #13
    Banned

    Join Date
    Feb 2017
    Posts
    103
    Thanks Thanks Given 
    33
    Thanks Thanks Received 
    101
    Thanked in
    47 Posts

    Default

    Quote Originally Posted by Fallen View Post
    When using VW software and you find 6 bytes from the ECU and 7th byte for a working key, it would be nice if you could just press program and it will write all the bytes to the transponder.
    At the moment, once you have found the 7th byte, you then have to manually select "all 7 bytes known" and then manually transcribe all the bytes into this field.
    It's a painful process and if you get 1 of the 14 digits incorrect, its all over.
    We have two different processes which is resulting in this inconvenience:
    1. To prepare the key - for this purpose we need to find the 7th byte
    2. To learn the key - unfortunately this process is not directly connected to #1, and the key learning process will not try to find the 7th byte but ask you to insert all 7 bytes manually.

  21. The Following User Says Thank You to ventzy For This Useful Post:

    gttuning (23rd January, 2018)

  22. #14
    V.I.P. Member
    Fallen's Avatar
    Join Date
    Dec 2009
    Posts
    2,290
    Thanks Thanks Given 
    1,527
    Thanks Thanks Received 
    1,447
    Thanked in
    628 Posts

    Default

    Quote Originally Posted by ventzy View Post
    We have two different processes which is resulting in this inconvenience:
    1. To prepare the key - for this purpose we need to find the 7th byte
    2. To learn the key - unfortunately this process is not directly connected to #1, and the key learning process will not try to find the 7th byte but ask you to insert all 7 bytes manually.
    Yes, this is the problem I am talking about.
    Surely they could rewrite a small section of the code to write the found bytes into the waiting boxes.
    VVDI does this automatically, perhaps they could borrow their code.

  23. The Following User Says Thank You to Fallen For This Useful Post:

    yugo45 (18th February, 2018)

  24. #15
    Banned

    Join Date
    Feb 2017
    Posts
    103
    Thanks Thanks Given 
    33
    Thanks Thanks Received 
    101
    Thanked in
    47 Posts

    Default

    Quote Originally Posted by Fallen View Post
    Yes, this is the problem I am talking about.
    Surely they could rewrite a small section of the code to write the found bytes into the waiting boxes.
    VVDI does this automatically, perhaps they could borrow their code.
    Thank you for the feedback. We will try to add an automatic insertion and release it with the next VAG software build in order to avoid mistyping errors.

  25. The Following 6 Users Say Thank You to ventzy For This Useful Post:

    Fallen (19th February, 2018), isma123 (20th February, 2018), madaxe (19th February, 2018), rapidlocksmiths (19th February, 2018), Talleresmalaga (30th October, 2018), z786 (19th February, 2018)

 

 
Page 1 of 258 1234561151101 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.