Mercedes Vito early model (W639) with 908 MCU, avdi after 90 minutes still cannot pull pass out from EIS using fuse relay and DS Box (tested on 2 cars).
Send mail to support, Alek reply to me that is impossible and to send my SN from AVDI to check, then no more reply. End of story.
Still have to pull that EIS to read (a pain in the a*s)
Just wanted to let you know that we do now support the latest DELPHI CAN BSIs for exchange, key learning and mileage calibration.
Every feedback would be appreciated.
Last edited by ventzy; 20th February, 2018 at 05:40 PM.
clearly (18th March, 2018), Fallen (21st February, 2018), lupu_sandu (21st February, 2018), M3L3R (20th February, 2018), Talleresmalaga (30th October, 2018), topclef (21st February, 2018)
Tested today 639 545 07 08 with HC908 got key PSW in around 80-100 mins639 545 07 08_HC908_PSW.jpg
It will be Free of course mate .........
bearheroes (21st February, 2018)
I already read a few pin codes from recent PSA cars, but when is older cars, it allways loop on ignition on - ignition off - on - off... There is something i should do?
Enviado do meu MI 6 através do Tapatalk
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
[QUOTE=lmqcatarino;3220951]I already read a few pin codes from recent PSA cars, but when is older cars, it allways loop on ignition on - ignition off - on - off... There is something i should do?
don't use auto detect vehicle model , choose the car model .
otherwise AVDI will try to read pin from engine control 2001-2016 .
you have two choices in the morning: go back to bed and continue dreaming, or you get up to make your dreams come true
lmqcatarino (21st February, 2018), ventzy (21st February, 2018)
Tools: AVDI, Im608, VVDI 2, VVDI MB, T-Code, SBB
Eeprom: VVDI Prog, Orange, Tango, TMPro, R270, ABPROG
Other: VVDI Mini Key Tool, Key Tool, KD-X2
Electronic key machine: Silca Triax, Idea, Unocode
Bookmarks