help pls cas3+ synchro not possible after add key with avdi

**Sidemark** · 20th January, 2018, 08:07 PM

Originally Posted by bearheroes

So what’s the problem with me???
I do all these with just a free hex editor and tool32???

I dont care what u use to do all this

**bearheroes** · 20th January, 2018, 08:09 PM

Originally Posted by Sidemark

I dont care what u use to do all this

So do we, about your expensive tools...

**Sidemark** · 20th January, 2018, 08:15 PM

Originally Posted by bearheroes

So do we, about your expensive tools...

It seems to me that u are very care about my tools.
It is one proverb - better see in your own plate .
First dme is lost (but it is hard to get dead siemens at all - i think it can be reserected by winkfp in expert mode)

**bearheroes** · 20th January, 2018, 08:23 PM

Originally Posted by Sidemark

It seems to me that u are very care about my tools.
It is one proverb - better see in your own plate .
First dme is lost (but it is hard to get dead siemens at all - i think it can be reserected by winkfp in expert mode)
Second chance is key data, which does not need expensive tools at all

If you ever want to stop spending money to expensive tools, and do exactly the same job with these, and sometimes better, ask me... for free of course...

Sent from my iPhone using Tapatalk

**Sidemark** · 20th January, 2018, 08:26 PM

Originally Posted by bearheroes

If you ever want to stop spending money to expensive tools, and do exactly the same job with these, and sometimes better, ask me... for free of course...

Sent from my iPhone using Tapatalk

Ok , i will think about it. ))
Do car for topicstarter - it will be appreciated such help, for free ofcourse with your expensive tools, China tools are not in this account ))

**bearheroes** · 20th January, 2018, 08:31 PM

Originally Posted by Sidemark

Ok , i will think about it. ))
Do car for topicstarter - it will be appreciated such help, for free ofcourse with your expensive tools, China tools are not in this account ))

Probably you didn’t understand that i don’t use expensive tools...i’m too poor...

Sent from my iPhone using Tapatalk

**Sidemark** · 20th January, 2018, 08:43 PM

Originally Posted by bearheroes

Probably you didn’t understand that i don’t use expensive tools...i’m too poor...

Sent from my iPhone using Tapatalk

May be im blind and dont see this cannot understand this, but we are going far away from the thread . Topicstarter need help. Help him !!!

**kiszka** · 20th January, 2018, 09:05 PM

..........

**Sidemark** · 20th January, 2018, 09:12 PM

Originally Posted by kiszka

The smartest person first starts, helping colleague
and please return to the subject
if not, it will send a report to delete the topic to the trash

no no no . What trash ? Help him, please. U have a chance too like all of us.
I said all from my side. DME he has lost, but i think can be reanimate via teamviewer if he has winkfp, because siemens hard to kill.

**Sidemark** · 20th January, 2018, 09:24 PM

Now we have closed circle - there is no working key, dme is dead.
I see now two ways - reserect dme or downgrade cas firmware for making key.

**bearheroes** · 21st January, 2018, 01:34 PM

Cyril erase your inbox

Sent from my iPhone using Tapatalk

**Talleresmalaga** · 21st January, 2018, 06:17 PM

Frankly, after reading the post I am stunned, it is not about being a private individual with a Chinese clone or a workshop with the original, that requires help is what is important, we are all ignorant in something. most of the experience and knowledge, depends on the complications and studies of the past, in order to account the forum is to help, as when we need help, not to be more or less, or have more or less tools, which helps , if not, to make our path easier, either as private or professional, thanks to sharing the knowledge humanity has come to where it is, with its pros and cons,

Unfortunately, although I would like to help this fellow member of the forum, my knowledge on this subject is null. and the echo of reading it is to acquire new knowledge, and I find whoever has it more expensive or longer ....

please if you can, help the friend, why not only help him, if not others who have the same problems in the future, and people like me. who do not know about this, we can learn, and if tomorrow we are given this problem, we know how to respond.

All this I say with my best faith, I hope you do not take it badly, because my intention is the opposite

regards

**rafal** · 21st January, 2018, 07:02 PM

What can I say??? If someone is dissatisfied with the rules of forum, they do not have to use it.

**cyril** · 21st January, 2018, 08:14 PM

thanks for all friends we just start the car by the help of SIDEMARK using my AVDI on team viewer thanks for all of u and specially SIDEMARK
i honestly don't have knowledge in BMW cars but finally solved

**Sidemark** · 21st January, 2018, 10:25 PM

Originally Posted by kiszka

You are too stupid to understand me
do I have to add something more

I add something. I was right - read post 16 again and again, sorry but this is true - u just dont understand what u are typing here, all your reputation is built on false data that u typing here.
Think about next time what data u are typing here and what influence this data can make on such expensive "toys" like bmw.