Here you go mate, test and report please, pass in pm.
Here you go mate, test and report please, pass in pm.
Don't Forget to Rep + Thanks If I helped you
pedjica (19th October, 2018)
Not work....................
If I helped, please, use magic buttons reputation+thanks.
what is the fault code you are getting?
Don't Forget to Rep + Thanks If I helped you
Friday,19,October,2018,12:53:08:04300
VCDS Version: Release 18.9.0 Running on Windows 7 x86
www.Ross-Tech.com
Address 15: Airbags Labels: 6C0-959-655.clb
Control Module Part Number: 6C0 959 655 J HW: 6C0 959 655 J
Component and/or Version: VW20Airbag002 002 0380
Software Coding: 88C0C000000000005C0000CA000800000000
Work Shop Code: WSC 00049 770 00114
ASAM Dataset: EV_AirbaVW20BPAVW26X 001001 (SE26)
ROD: EV_AirbaVW20BPAVW26X.rod
VCID: BA71702C3D4FD59A5B-80EE
2 Faults Found:
9443091 - Driver's Side Airbag Crash Sensor
B1017 13 [137] - Open Circuit
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 70264 km
Date: 2018.03.09
Time: 02:49:34
9451027 - Crash sensor side airbag; passenger side
B1036 13 [137] - Open Circuit
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 70264 km
Date: 2018.03.09
Time: 02:49:34
If I helped, please, use magic buttons reputation+thanks.
You dont have a crash fault mate. you have 2 crash sensors that are faulty, you need to replace them as crash sensors cannot be emulated by a resistor.
Don't Forget to Rep + Thanks If I helped you
I know that , but its minimal possibile to both dont work.
If I helped, please, use magic buttons reputation+thanks.
the coding wasn't changed in the file you have sent. only the crash was removed. so probably the sensors were defected after accident
Don't Forget to Rep + Thanks If I helped you
I try another sensors , and chech instalation , but its same.
If I helped, please, use magic buttons reputation+thanks.
Bookmarks