About millage correction..

[sum444584]

hello,
I have Nissan sunny with 93c66 and 1307789 km try to read it with digimaster and digiprog but selecting what ever model it shows different km by tool.is that means cant we manually change its value by these tools instead of posting dumps here?

im not good with hex editing so is there anyway to solve this kind of issues?

br.

[rafal]

post dump ...........

[sum444584]

thank you sir,
but need any stand alone method or calculator for this.otherwise each-time odo comes I have to run over here!!
I have ordered
UPA USB Programmer V1.3 is there any scripts to work with this programmer to adjust millage?

thank you

[hcip]

thank you sir,
but need any stand alone method or calculator for this.otherwise each-time odo comes I have to run over here!!
I have ordered
UPA USB Programmer V1.3 is there any scripts to work with this programmer to adjust millage?


thank you

Post the dump that read by digimaster (*.YHF) or digiprog we will calculate it for you

[Cllau]

hello,
I have Nissan sunny with 93c66 and 1307789 km try to read it with digimaster and digiprog but selecting what ever model it shows different km by tool.is that means cant we manually change its value by these tools instead of posting dumps here?

im not good with hex editing so is there anyway to solve this kind of issues?

br.

m8, desolder and read eeprom off pcb. Never read this chip on board! Thats why you get different value...

[sum444584]

no I did it after remove and connect it into OBP adapter of digimaster and did same for digiprog.select automatic selection and manual selection 93c66 but it displayed wrong millage value.anyone know any other reason for this?
https://www.youtube.com/watch?v=k4EaHt7-Hlw
can someone describe this which software use for edit km in here? can we do this with carprog 10.5 clone? I think this method we can adjust any km by our selves.right?

please describe this in English and which other tools we can use for same process?
br,

[jomberykaso]

Just desolder eeprom from dash, then use digiprog and select nissan terrano 93c66 to change mileage in your sunny, that´s all

[sum444584]

right now i have digimaster at with me. yes i select nissan terrano 93c66 but it shows low km than original!!
i have past experience with try to adjust same situation odo finally only showed ------ on its lcd!!
original millage is 130789km
digimaster showing millage is 130326km

i attached both format file read from digimaster.someone tell me why this happen??
this dump nissan fb15 not 14

[vageric]

this is normal.
just write mileage you want and you be ok.

[hcip]

original millage is 130789km
digimaster showing millage is 130326km

It has a little difference, its normal....

in my calculation, your file read 130838km

[sum444584]

thanks for help m8s,
br

[ascrap2003]

It has a little difference, its normal....

in my calculation, your file read 130838km

You have any new calculators hun?

[sum444584]

hello m8s,

can someone help me to adjust millage Mahindra Maximo.dash has microchip pic16f946 and 8pin small ic but cant see its numbers...
any master doing this cluster? i guess 8pin small ic might be eeprom ..how to read this cluster.??
have upa-usb 1.3,digimaster ,digiprog

need help m8s
br

[zckariya70]

hello m8s,

can someone help me to adjust millage Mahindra Maximo.dash has microchip pic16f946 and 8pin small ic but cant see its numbers...
any master doing this cluster? i guess 8pin small ic might be eeprom ..how to read this cluster.??
have upa-usb 1.3,digimaster ,digiprog

need help m8s
br

Buy pickit 2 u can do easily with it..........................km stored in pic16f946