SUBARU XV2012 stop working

**wd bau** · 20th January, 2018, 07:45 PM

Hello
i am helping my friend he got this car after another one locksmith tried to add key to it and the car stops working (even customer original key ) ,its a 2012 SUBARU XV.
I tried every tool I have G scan ,T code and so on I did even add anther G chip to it by tango memory 24c02 in the BCM but the car is the same.
the key is programed in the BCM but the immo light will go off and back on again .
I did not find any solution after looking in the net every where , the BCM and ECU they lost synchronization ,evry one says U have to send the car to SUBARU dealer and we don,t have one hear.
P1571 is in the ECU
ANY ONE CAN HELP
THAN,K U

**nickolasd** · 22nd January, 2018, 04:32 PM

is far is i know bcm(BIU) gets synchronized with cluster. looks like dump was damaged. find another used bcm add key via dump and sync with cluster via dump, I'm sure somebody can help with that here.
or find dump out of the same bcm part number do key and sync.
i have one dump out of 13 XV may be it will work for you. post your part number.

when you send car to subaru dealer they remove bcm and cluster and send it somewhere to reset to a brand new state.

**wd bau** · 23rd January, 2018, 01:18 PM

Originally Posted by nickolasd

is far is i know bcm(BIU) gets synchronized with cluster. looks like dump was damaged. find another used bcm add key via dump and sync with cluster via dump, I'm sure somebody can help with that here.
or find dump out of the same bcm part number do key and sync.
i have one dump out of 13 XV may be it will work for you. post your part number.

when you send car to subaru dealer they remove bcm and cluster and send it somewhere to reset to a brand new state.

here BCM #88281FJ200 with Eprom 24c02

**eliaselias** · 22nd January, 2018, 10:42 PM

Originally Posted by wd bau

Hello
i am helping my friend he got this car after another one locksmith tried to add key to it and the car stops working (even customer original key ) ,its a 2012 SUBARU XV.
I tried every tool I have G scan ,T code and so on I did even add anther G chip to it by tango memory 24c02 in the BCM but the car is the same.
the key is programed in the BCM but the immo light will go off and back on again .
I did not find any solution after looking in the net every where , the BCM and ECU they lost synchronization ,evry one says U have to send the car to SUBARU dealer and we don,t have one hear.
P1571 is in the ECU
ANY ONE CAN HELP
THAN,K U

hello post dump for bcm
i will solve your problem

**wd bau** · 23rd January, 2018, 01:16 PM

Originally Posted by eliaselias

hello post dump for bcm .... and dump for ecu...
i will solve your problem

here ECU and BCM dump

**fazul001** · 22nd July, 2018, 06:16 PM

hello friend do u know how to get pin for subaru keyless

**vanos batam** · 23rd July, 2018, 09:15 AM

Originally Posted by fazul001

hello friend do u know how to get pin for subaru keyless

post the dump

**Piter2004** · 11th August, 2018, 04:52 PM

hello
I have Subaru impreza with problem P1571. Could help me?

There is how repaired this problem. Don't forget geive me reputation. No password required

Thanks

**eliaselias** · 16th November, 2018, 11:47 AM

Originally Posted by Piter2004

hello
I have Subaru impreza with problem P1571. Could help me?

Thanks

hello sorry for the late reply i did not notice that you make a post here
anyway this is your file in case you still need it

**Piter2004** · 30th December, 2018, 10:02 PM

This is information what i did, how repair this problem. Please don't forget give me reputation. Thanks

**jp71321** · 15th June, 2019, 08:16 PM

subaru xv crossteck 2013 tried to program key wot turn on my bcm is 88281fj621 EEPROM 24C02

**eliaselias** · 15th June, 2019, 09:02 PM

Add key job or all key lost?
Post dump to fix

**lazymechanic** · 8th July, 2019, 02:45 PM

Hi guys, i am not sure if this is out off this topic but what tool is good to add key for Subaru after 2009, I try skp900 but it only has all key lost function, I am not sure that the only way to add key? Don’t want to mess up the car so better ask someone who knows

**hsierra** · 20th February, 2021, 11:11 PM

Originally Posted by eliaselias

hello post dump for bcm
i will solve your problem

HELLO: I HAVE SUBARU CROSSTREK XV 2013, THE INSTRUMENT CLUSTER WAS REPLACED AND NOW IT HAS THE THEFT ACTIVATED, AND I CANNOT SYNCROINIZE THE SYSTEM, TRY WITH SEVERAL PROGRAMMING DEVICES BUT WHEN THE 15 MINUTES OF WAITING IS OVER. TELL ME MESSAGE "SYNCRO FAILURE". PLEASE IF YOU CAN HELP ME, I THANK YOU. THANK YOU !

**hsierra** · 20th February, 2021, 11:14 PM

Originally Posted by hsierra

HELLO: I HAVE SUBARU CROSSTREK XV 2013, THE INSTRUMENT CLUSTER WAS REPLACED AND NOW IT HAS THE THEFT ACTIVATED, AND I CANNOT SYNCROINIZE THE SYSTEM, TRY WITH SEVERAL PROGRAMMING DEVICES BUT WHEN THE 15 MINUTES OF WAITING IS OVER. TELL ME MESSAGE "SYNCRO FAILURE". PLEASE IF YOU CAN HELP ME, I THANK YOU. THANK YOU !

BCM DUMP ONLY?