Virginize bsi

**MJeppesen24** · 18th February, 2018, 04:17 PM

Hello DK

I wanted to hear what equipment you use to read and write PSA bsi?

I am new to this industry.

**rafal** · 18th February, 2018, 04:44 PM

e.g. xprog or upa

**MJeppesen24** · 18th February, 2018, 05:37 PM

I would like to take a closer look at them

thank you.

What about I/O Terminal?

**Beebras** · 20th February, 2018, 09:31 PM

TL866 programmer works great. And also you can do it with terminal.

**electronicscars** · 1st March, 2018, 01:26 AM

HI , any bsi you can virginize whit all dump in FF but in other specific you need a specific dump or the bsi it will not work . And any bsi as the jhonson controls brand you can see the data directly in the asc2 code whit any programer and others as siemens and valeo the data is encrypted in this case you can use the function of the inmokiller program in citroen brand have for encript/de encript citroen-peugeot bsi dump, you open the dump and de encrypt and after you can see the real data in the asc2, have pin code chasis and if write FF in this data and after encrypt again whit inmokiller (you have to write this new dump ) .The bsi are virgen of pin code and vin, and can program in other car

**MJeppesen24** · 4th March, 2018, 09:22 PM

I have read a little about the different possibilities there are. I / O Terminal and Smoke, appear to be some really good prog's.

But what software options are there for making a virgin file of PSA BSI

with best regards

**rob h** · 4th March, 2018, 09:32 PM

You can download the software and run it without interface.
You will get a glimps of what it can do!

Originally Posted by MJeppesen24

I have read a little about the different possibilities there are. I / O Terminal and Smoke, appear to be some really good prog's.

But what software options are there for making a virgin file of PSA BSI

with best regards