Passat b6

**SMV** · 21st February, 2018, 02:27 PM

Hi guys I need a bit of help please.
Need to unlock all doors and trunk on passat b6. Picked door lock numerous times with no open. Took chance and airbagged the door and hooked the handle and door opened. The remaining doors are locked. Dealer contact tells me all doors should have opened. All keys lost situation, looking for info on how I can open them. Anyone have experience with this car.

Thanks

Sent from my SM-T713 using Tapatalk

**rola1971** · 21st February, 2018, 03:35 PM

it is dead lock.you mechanic key to unlock door or picking doors lock

**klesk1986** · 21st February, 2018, 04:38 PM

In all key lost situation you will have a little gymnastic. Give year and engine ecu type

**SMV** · 21st February, 2018, 07:01 PM

2006

Sent from my SM-G920F using Tapatalk

**Weasel3** · 21st February, 2018, 08:00 PM

Did you test to disconnect the battery?
By the picture of the ECU. You maybe did so.
I think it should be possible to open the door from the inside. When battery is either flat or disconnected.

**SMV** · 21st February, 2018, 08:28 PM

Originally Posted by Weasel3

Did you test to disconnect the battery?
By the picture of the ECU. You maybe did so.
I think it should be possible to open the door from the inside. When battery is either flat or disconnected.

Thanks weasel I will give that a go tomorrow

Sent from my SM-T713 using Tapatalk

**klesk1986** · 21st February, 2018, 11:34 PM

In case all key lost and alarm there is no chance to open doors (deadlock). My method is pull out glovebox and next comfort module. Take on bench, read eeprom and program new transponder or use id48w if you don't want write file back. Most difficult part is glove box dismantle with closed passengers doors.

**igorr** · 22nd February, 2018, 07:37 PM

Originally Posted by klesk1986

In case all key lost and alarm there is no chance to open doors (deadlock). My method is pull out glovebox and next comfort module. Take on bench, read eeprom and program new transponder or use id48w if you don't want write file back. Most difficult part is glove box dismantle with closed passengers doors.

what
you brake window and then dismount cm!!!!!!!!!

**truedetective** · 23rd February, 2018, 12:54 PM

Avdi is one option or you can remove glovebox and CM without opening the passenger door however as klesk said you need to get gymnastic. Although I think by now you might have unlocked it?
avdi.jpg

**Weasel3** · 23rd February, 2018, 01:20 PM

In this situation it is very easy to remove the hole seat. And place it temporally further back in the vehicle.
4 bolts and one small airbag connector. And one more larger connector.
Important to use some protection, to avoid any damage from metal parts.