Kia Cadenza ECU/ECM swap (MT86 Delphi) need suggestions

[demirhas]

Hello all,

For kia cadenza 2011 ECU is lost and there a broken key with only metal part,
we are trying to swap a used ECU.

Car Vin No. : KNALN414BB50***60 (Pin No. : 85***0) Cadenza 2011 3.5L dohc
ECU Vin No. : KNDMG4C76C64***54 (Pin No. : 70***8) Sedona 2012 3.5L dohc

We plan to neutralize ECU than neutralize smartra than learn key.
We installed ECU to car. At neutralize ECU stage by x431 pro we got "wrong pin!!" a few times than comminication error.
Please help to verify pincode or procedure.

[morfej]

Are you shure the used ECU pin code it correct one ?

[demirhas]

Pin no's are from ebay. Probably ok.

[morfej]

I hope you did use ECU pin when u tried to neutralize the ECU ?

But if it doesn't work than for shure i guess it's not the correct pin.

[demirhas]

Yes I tried with the ECU pin. I tried the others also including old pin's. I got below info. If this is the case what can be done?

In Hicom coverage list there is no check at engine ecu coding for cadenza "ENGINE G 3.5 DOHC (Unleaded) CAN - Delphi"
http://www.obdtester.com/hicom-eculi..._vg/g_2.4_dohc (check at ecu coding)
http://www.obdtester.com/hicom-eculi..._vg/g_3.5_dohc (NO check at ecu coding)

[demirhas]

there is a thread solved, but ı cant get the file and dont know the device to do

http://mhhauto.com/Thread-SOLVED-ECU-MT86-dead

[Asifmehmmod1]

after three wrong pincode attempts it willl lock the ecu...so wait for 2 hours.
send me correct vins i will calculate pins for you.

Regards,
Asif

[demirhas]

It was a whole day trial. I waited two hours may be more. I copied and pasted the vins in first message. Vins are ok but not sure about pins.