VW Touran 2003 - remote adaptation limited to only 1 remote

**Duracell2** · 19th March, 2018, 03:16 AM

VW Touran 2003

I tried 3 different remotes and I was able to adapt everyone of them , BUT ONLY ONE at the time. (never all together)
I was not able to adapt more then one at the time.

tried
1) FVDI
2) VCDS - > freezes after changing new value from 1 to 2 in (46-adaptation)
3) VAG-CAN pro -> index out of range, when trying to enter 2 as new number of remotes

Seemed to me like the car is set to accept max 1 key in the adaptation procedure.
Or something wrong with the car.
I did this procedure with Golf MK5 many times without problems.

Any idea ?

**godfathertre** · 19th March, 2018, 04:12 AM

Have you reset all remotes adaptation to 0 trough vcds if so than reprogram how many remotes you like if not will not work.

**Duracell2** · 19th March, 2018, 06:08 PM

Originally Posted by godfathertre

Have you reset all remotes adaptation to 0 trough vcds if so than reprogram how many remotes you like if not will not work.

Yes I did. Reset all to 0 , several time, several tries, all combinations.
Didn't work.

For now I will archive this case as CCM fault.
If I gain new infos, the case will be reopened

**drugowaz** · 19th March, 2018, 07:06 PM

I get similar problem. Just was imposible to add any remotes. Only reset to 0. But program was not available. When open add channel everywhere was error .

**ovitanov** · 19th March, 2018, 07:41 PM

I had the same issue with Audi TT. My remotes are from China, good quality and very cheap.
I have tryed 4 remotes with no sucess. After long time i got very angry, took kd900 and generated remotes with it.
Car acepted all 3 remotes at the moment. My conclusion is that remotes from China are with the same ID's and the car recognize all 3 just like one.
Try my way.

PS. Also, when erase exsisting remotes with VCDS, do not scroll to "0", type "0".

**dtip** · 19th March, 2018, 07:56 PM

That problem usually occurs when you have different part numbers. CC module can accept all that part numbers but only same part numbers if you want more than 1 remote in memory.

**kamolsf** · 13th May, 2018, 01:20 AM

Thank you,Sir

**kamolsf** · 13th May, 2018, 01:32 AM

Originally Posted by ovitanov

I had the same issue with Audi TT. My remotes are from China, good quality and very cheap.
I have tryed 4 remotes with no sucess. After long time i got very angry, took kd900 and generated remotes with it.
Car acepted all 3 remotes at the moment. My conclusion is that remotes from China are with the same ID's and the car recognize all 3 just like one.
Try my way.

PS. Also, when erase exsisting remotes with VCDS, do not scroll to "0", type "0".

Thank you, Sir