please help with edc17u01

**ecu repair** · 19th March, 2018, 02:25 PM

Hi mates,
I have 2009 vw polo 1.9 diesel with defective ecu.Somebody already tried to modify files so the ecu has eeprom error.The customer brought me an other 2nd hand ecu which i can see that it was also opend by somebody and it has a checksum error.
I am sending in attachments the files of both ecus read by galetto v54.
Please mates i need your help to correct files for any one of these 2 ecus.immo of would be very good if it is possible.
Thanks in advance,
Best regards.

**CarCity** · 19th March, 2018, 02:30 PM

Originally Posted by ecu repair

Hi mates,
I have 2009 vw polo 1.9 diesel with defective ecu.Somebody already tried to modify files so the ecu has eeprom error.The customer brought me an other 2nd hand ecu which i can see that it was also opend by somebody and it has a checksum error.
I am sending in attachments the files of both ecus read by galetto v54.
Please mates i need your help to correct files for any one of these 2 ecus.immo of would be very good if it is possible.
Thanks in advance,
Best regards.

ECU_MODEL=EDC17U01
VIN=WVWZZZ9NZ8Y200830
IMMO_ID=VWZ7Z0H6419371
CS=65F87F52567156
PIN=09418
MAC=3BBEEDD5
IMMO_STATUS=Learned

**ecu repair** · 19th March, 2018, 02:42 PM

Thank you mate,I do appreciate your support,I would try it and report it back.Thanks again.

**ecu repair** · 19th March, 2018, 03:48 PM

mate i have just tried your dump.The car has 2 original keys.when i try the firt key the immo light is flashing all time also the glowplug light is also flashing and the cars does not start.When i try the other key then the immo light is off but the glowplug light is also keep flashing and the car does not start.I read out the faults code.when i erase it the glow light is off but the car does not start and i have the same fault code back again and the glow light start to flash again.
I would appreciate any further help.
Thanks in advance,
Best regards.

**ecu repair** · 19th March, 2018, 05:25 PM

mate,I have just tried your file with the other ecu (the 2nd hand) and i have got the same fault code.Any other ideas please?
Thanks in advance,
Best regards.

**leotdx** · 19th March, 2018, 06:10 PM

File is not for your ecu! Injectors are on another pin. Someone corrupted the immo too. You have one working key. Search for complet kit files immo+ecu!

**ecu repair** · 19th March, 2018, 06:31 PM

Thank you mate for your reply,I believe you are right simply because the pin code in the dashboard is different 05595

**ecu repair** · 19th March, 2018, 07:18 PM

mate is there anyway to change the immo info and pin code inside the ecu into the original pin code 05595 ?

**ecu repair** · 19th March, 2018, 08:54 PM

I think that the dashboard is not the original of the car.It has the pin code 05595 .
The vin of this car is WVWZZZ9NZ8Y200830 whis is the same inside the ecu and i think that the original pin code should be 09418.
Here is the dashboard file to check.A freind of DK help me to get the dashboard info which has the pin code 05595 but the vin inside is not the original pin of the car so that is why i think that this dashboard does not belong to this car so i think that the original pin code (09418) and original vin should be learned to the dashboard.I am really confused and still wondering if there is any possible way to solve this issue.
Thanks in advance,
Best regards.