Ford 5000 RDS not working

[Redas]

maybe somebody can suggest what to do. After turn on the display show AF52AUT after entering code for short time visible radio station and over again

AF52AUT

.

what could this mean

?

error code.jpg

[RadioChiP]

Maybe clip ON.Page 21
https://www.clubford.ro/documente/ma...io%20guide.pdf

[lucic66]

Maybe push buton 6.......10 ....second

maybe somebody can suggest what to do. After turn on the display show AF52AUT after entering code for short time visible radio station and over again

AF52AUT

.

what could this mean

?

error code.jpg

[Juliano31]

insert radio on car....need comunication with the car...

[KierAn20]

maybe somebody can suggest what to do. After turn on the display show AF52AUT after entering code for short time visible radio station and over again

AF52AUT

.

what could this mean

?

It is only the UK registration number of the Ford Galaxy car that this radio was once fitted to.

Go to this website: https://www.instantcarcheck.co.uk/ and enter the number AF52AUT and it will come back with a 2002 Ford Galaxy.

This 5000 radio you have there has the correct shape fascia for Ford Galaxy fitment of course.

To get rid of the old registration number:

With radio switched on -

Hold down MENU button for a few seconds until until "TA-DIST" appears.

Now make multiple single presses of the MENU button until you get to "VID - - - -" (this is Vehicle Identity option).

Enter car radio code here to get access to VID.

Now use the volume control rotary knob to scroll each digit until it is blank - it goes 7,8,9, ,A,B,C etc. So you need to stop it between 9 and A for a blank digit entry.

Press > to go to next digit and do the same again until all digits are gone (blank).

When all digits are set back to blank / empty, just press MENU once to exit option.

Registration number will now be gone.

[Redas]

Thanks everyone for quick replay. Problem was that I tested radio on table without car. After put on the car the message is gone and ALL WORKING.

[Juliano31]

Thanks everyone for quick replay. Problem was that I tested radio on table without car. After put on the car the message is gone and ALL WORKING.

You see I speack you.... need car..

[RadioChiP]

I know this solution “100%100” but well but my English not so good
I could not tell