Multidiag 2017 SP5 + Hex for Pic

**manu54000** · 24th March, 2018, 01:27 PM

Hi everybody !

Sorry for my bad english.

Tonight, I've perform to program a pic to work with Multidiag 2017 III SP4

- First : You have to install Multidiag WITHOUT internet connected. It's not difficult to find it to download.
Serial to install it : 033918
Download link : http://mhhauto.com/Thread-ACTIA-Multidia...-sp4-41-41

- Second : You must have a old interface of multidiag. Black and yellow

- Third : To program it you have to buy Pickit 3 to connect to the 12F629 with an easy clip without desoldering it.

- Program it with the VDD + 5v (don't forget to note the oscal value before programming)

And it's OK

Need the Hex file ? No problem !
https://yadi.sk/d/IpuMv0nu3QmHJy

And the keyupdate :
https://yadi.sk/d/0d7Tgqw23QmRMb

If you need help ...Ask !

Please use THANKS and REPUTATION if my post is helpful...

**d.zio** · 24th March, 2018, 05:25 PM

And what about activation

**manu54000** · 24th March, 2018, 07:08 PM

no need activation ! I tried and test it

**rui** · 24th March, 2018, 09:59 PM

Hello.
could show an image as it is pickit3?
I was watching on ebay and found several types.

thank you

**manu54000** · 25th March, 2018, 01:14 AM

Originally Posted by rui

Hello.
could show an image as it is pickit3?
I was watching on ebay and found several types.

thank you

See attached files

**rui** · 25th March, 2018, 12:19 PM

Thank you for the image to be sure.
For your description it is enough to have this interface to be able to connect to the cable to reprogram the chip, or anything else is needed.
I have the cable of the 2013 version and I can not get it to work correctly because it is always saying out-of-date subcription.

thanks

**manu54000** · 25th March, 2018, 01:56 PM

Originally Posted by rui

Thank you for the image to be sure.
For your description it is enough to have this interface to be able to connect to the cable to reprogram the chip, or anything else is needed.
I have the cable of the 2013 version and I can not get it to work correctly because it is always saying out-of-date subcription.

thanks

As you can see in the picture, i've attached an easy clip to program the chip with out desoldering it.
That's all, nothing else needed .

When you want to do this, ask if you need help

**dimitar** · 25th March, 2018, 07:04 PM

You can also use ponyprog or picprog
Both work and they are easy to make diy
No need power supply

**rui** · 30th March, 2018, 10:11 PM

Originally Posted by manu54000

See attached files

Hi

thank you for the detachment of the image.
How can I find this card and cable with tweezers.
As for the interface I have already ordered.

**Liteace** · 14th June, 2018, 07:30 PM

Couple of questions, Anyone got a software download link apart from the one at mhh and if I buy new blank 12F629 can I program that ?

Thanks

**chipcarcordoba2** · 9th October, 2018, 07:21 AM

Hi and thanks for your help. Can you program this Eprom with Beeprog?
and a partner is running a 2011 interface with this information from our partner?

Greetings.

**western6089** · 28th October, 2018, 09:51 AM

Actia III-2017_SP5_41.51
https://ulozto.sk/!lnoqRF0mfSe7/iii-2017-sp5-41-51-zip

**doula34** · 18th October, 2023, 12:22 AM

Hi everybody !

ACTIA MULTI-DIAG III 2018_43.06

With crack

https://mega.nz/folder/jjg3kCYC#ZpmTmmQ-Rnr9XTqIjYJDNw

Installation instructions - WORKS ONLY ON 32BIT (TESTED ON WINDOWS 7 SP1 X32)

INTERNET MUST BE OFF

https://www.youtube.com/watch?v=Cbhq0Vlpc2A

enjow