Hello....
I need to add a key to a Toyota Auris 2013 with 8A chip.....
Any cheap tool that can do this job? (Any change with techsteam?)
Thanks...
Hello....
I need to add a key to a Toyota Auris 2013 with 8A chip.....
Any cheap tool that can do this job? (Any change with techsteam?)
Thanks...
Η κότα έκανε το αυγό ή το αυγό την κοτα;
xhorse mini key tool
Can xhorse mini tool programming a key to car?????? Have obd connector????
Η κότα έκανε το αυγό ή το αυγό την κοτα;
Never tried with KD, probably has no target transponder available. Xhorse & Tango both offer 8A cloning to XT27A & LKP-04 transponders respectively.
Xhorse also offers diagnostic key learning with the mini OBD & FT OBD tool if you have a valid working master key.
If you have Techstream around it will program a key just fine as well, no in/out code needed, no dealer key just a ready to program Toyota 8A/H transponder which are readily available at aftermarket suppliers.
Hmmm . . .
KD should be able to clone a normal transponder 8A key.
Everyone assumed you meant a standard ignition key and not a smart key with start button. Please confirm if you speak about a smart or ignition lock key.
If it is a smart key it is not possible to clone but only to program one over OBD.
The cheapest option as far as I know for programming toyota keys is via a Techstream clone but that is used mainly for adding keys as the AKL requres several virgin units to accomplish.
Please explain your problem in more detail se we can help better.
they ask me if i can make a key to a toyota auris 2013, car is with one key and they want and a second one......
if techstream ia able to add it that is nice... I don't have see the car, the key is with blade and 3 buttons remote....
i see keydiy have a head (kd-mate) for toyotas but i don't have it, and as i sead if techstream is capable to add the key then kd-mate is not necessary.....
but keydiy can't clone that key...... unfortunately....
keydyi_1.jpg
Η κότα έκανε το αυγό ή το αυγό την κοτα;
Bookmarks