Reply With QuoteNever can help me please please:-((((
Gesendet von iPhone mit Tapatalk
Results 1 to 15 of 18
Thread: Help fail solder EDC17CP44 :-(
-
14th April, 2018, 01:26 PM #1Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
Help fail solder EDC17CP44 :-(
Hello all user I’m big problem my edc17.
Im try to solder Boot Pin on The ecu,my desoldar station.
Unfortunately, when I soldered, I came to the resistance that is right next to it.
wanted to solder it back on but my forceps was too thick, while the resistance jumped off and I can not find him anymore :-(
does anyone have any resistance or whatever belongs there?
Thanks alot!!
Gesendet von iPhone mit Tapatalk
-
16th April, 2018, 10:09 AM #2Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
-
16th April, 2018, 02:40 PM #3Top Poster +
- Join Date
- Nov 2010
- Location
- Seafront
- Posts
- 224
- Thanks
- 33
- Thanks
- 31
- Thanked in
- 14 Posts
your foto is bad , please take another one, then i can help
Working with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
-
17th April, 2018, 08:51 AM #4Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
Good morning tuberider,I have try a good Foto,look this please,and thanks for your help.
Gesendet von iPhone mit Tapatalk
-
17th April, 2018, 10:13 AM #5DK Veteran
- Join Date
- Mar 2013
- Location
- Europe
- Posts
- 1,360
- Thanks
- 224
- Thanks
- 584
- Thanked in
- 275 Posts
@moffo
Please Upload GOOD PICTURE !
Cant see Damage Part of PCB
-
17th April, 2018, 11:19 AM #6Top Poster +
- Join Date
- Nov 2010
- Location
- Seafront
- Posts
- 224
- Thanks
- 33
- Thanks
- 31
- Thanked in
- 14 Posts
...and make red spot around part that is missing
Working with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
-
17th April, 2018, 01:44 PM #7Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
hello dear forum, the problem is that there is no label on this component.
I can only say where the component was located, namely exactly next to the boot pin on the control unit.
So if you have a defective EDC17CP44, and take the time to solder it out and measure it, I would be very grateful!
maybe someone has a schematic of this ECU and can see what's up to it!
thank you very much !!
Gesendet von iPhone mit Tapatalk
-
17th April, 2018, 01:52 PM #8Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
This is what I’m need!
Gesendet von iPhone mit Tapatalk
-
17th April, 2018, 11:14 PM #9Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
Never chance to me guys?:-(
Gesendet von iPhone mit Tapatalk
-
18th April, 2018, 05:45 AM #10DK Veteran
- Join Date
- Mar 2013
- Location
- Europe
- Posts
- 1,360
- Thanks
- 224
- Thanks
- 584
- Thanked in
- 275 Posts
@moffo
Need better Quality Pic, sorry.
-
18th April, 2018, 10:21 AM #11Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
Good day.Better isit not posible !
Gesendet von iPhone mit Tapatalk
-
18th April, 2018, 11:11 AM #12Top Poster +
- Join Date
- Nov 2010
- Location
- Seafront
- Posts
- 224
- Thanks
- 33
- Thanks
- 31
- Thanked in
- 14 Posts
Originally Posted by moffo
Quality is good now , but now i don`t have the edc17c44 on the table , its send to customer , i will look in stock, maybe you are luckyWorking with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
-
20th April, 2018, 08:18 AM #13Top Poster
- Join Date
- Mar 2012
- Posts
- 177
- Thanks
- 20
- Thanks
- 5
- Thanked in
- 5 Posts
Thanks;-) Originally Posted by tuberider
Gesendet von iPhone mit Tapatalk
-
20th April, 2018, 08:52 AM #14Top Poster +
- Join Date
- Nov 2010
- Location
- Seafront
- Posts
- 224
- Thanks
- 33
- Thanks
- 31
- Thanked in
- 14 Posts
sorry bro no edc17c44 in stock , only edc17cp20 - but pcb layout is different - i can`t help , if you have the car there try 0 ohm resistance
Working with : Bosch FLA Dyno , KTS 650, WINOLS , CMD Master, Byteshooter Master, SPI, Powergate,CADOPRO, selfmade tools
-
20th April, 2018, 09:05 AM #15DK Veteran
- Join Date
- Dec 2017
- Posts
- 304
- Thanks
- 34
- Thanks
- 120
- Thanked in
- 88 Posts
I have on this evening.
What is the color of the resistor?AUTOTUNER, FLEX ,X17, TRASDATA / NEW GENUIS AND ALIENTECH MASTER OWNER.
FULL SWIFTEC AND EVC RESELLER
FILE SERVICE FROM 8AM - 9PM 7/7
BAPRO 4WD DYNO
Bookmarks