can happen on 0d69j,lost all data
Hi.
In which mcu is key data?
Got it without working key. Only service infrared. But it was not working
mcu mask is 0D69J
Read xprog right in photo all data FF
https://ibb.co/nzthxS
Renault ECU tool / IO terminal / A.S.W
can happen on 0d69j,lost all data
Ive readed left mcu
Readed ok load vvdi see keys and pass.
Made key. Nothing.
By ir reads hashes too.
What are solutions?
Renault ECU tool / IO terminal / A.S.W
Read again by IR key is visible and added pos7
Possible just write other eis eeprom?
Eis is 220 545 00 08 q11
Last edited by drugowaz; 17th April, 2018 at 12:15 PM.
Renault ECU tool / IO terminal / A.S.W
this left mcu eeprom. left like in picture
also when read by IR visible only SSID and hashes. eis pn and vin is blank fields
maybe key data is in left mcu and vin etc is in one with all FF?
Last edited by drugowaz; 17th April, 2018 at 02:26 PM.
Renault ECU tool / IO terminal / A.S.W
drugowaz (17th April, 2018)
This bin is readed with xprog
First i tried read right mcu. It didnt read . Resoldered mcu that it readed all FF. Thought something wrong with xprog. Than i took w208 eis same mcu. Ive done few earlier. It readed mcu right away. Than read agai w220 all FF
Than took left mcu of w220 it readed from first time. Loaded bin to progger. It showed hashes key pass etc. Key made as usual. Put in eis but no go. Only red led is on. Tok out in few times same. Than read by IR it readed same data and my added key was there.
Than tried read data by IR and put pass manualy. Made key. No go.
So or mcu is dead or data blank.
Renault ECU tool / IO terminal / A.S.W
You read 0D69J in circuit or on adapter? HC05 by xprog only on adapter.
Be polite. No Thanks + Rep, no HELP!!! Slava Ukcraine. Dead Putler civilians's killers!!!
With adapter. As i said did few before.
Renault ECU tool / IO terminal / A.S.W
Bookmarks