CD40 USB & GID

[MasterGav]

Hi all, im after some help please, im in search for a paired bin file/s for a Vauxhall Corsa CD40 USB and GID.

I have both stereo and display but wont pair with each other, both have been divorced/reset and i cannot seem to
pair them together, well the stereo will program but the display wont pair to the EHU.


The ident for the EHU is FB 13407108
The ident for the DIS is TA 13381204

If some one could help it would be appreciated greatly

[shooting]

Hi all, im after some help please, im in search for a paired bin file/s for a Vauxhall Corsa CD40 USB and GID.

I have both stereo and display but wont pair with each other, both have been divorced/reset and i cannot seem to
pair them together, well the stereo will program but the display wont pair to the EHU.


The ident for the EHU is FB 13407108
The ident for the DIS is TA 13381204

If some one could help it would be appreciated greatly

Are they both IN the car?

wbr

[MasterGav]

Bought them both second hand, and the scrap yard where i got them from said they reset the screen and display, which iv checked and its correct.
Both in delivery state.

Fitted to my car, went though the procedure but cannot get them to pair, so i though it load a paired bin file and try it that way?

[shooting]

Bought them both second hand, and the scrap yard where i got them from said they reset the screen and display, which iv checked and its correct.
Both in delivery state.

Fitted to my car, went though the procedure but cannot get them to pair, so i though it load a paired bin file and try it that way?

It'll be your tool, I'm guessing a Chinese clone Opcom?
You need to add the screen first then pair the radio

wbr

[MasterGav]

Ok cool il give that a try no its tech2win with a mongoose gm2 passthur

[shooting]

Ok cool il give that a try no its tech2win with a mongoose gm2 passthur

Is it a Clone tool?

wbr

[MasterGav]

Its a genuine pass thru that vauxhall allow to use

[bank]

Check for Mid Speed Can Bus Settings, it should be the same for EHU and DIS.
Also, you can post dumps here to check if it's divorced.
CD40 USB - 24c32
GID Delphi - 25080

[MasterGav]

Thanks, i have check the dumps and they are correct all divorced, just wont pair!!
I have an error code for the display, B1000 which on a Corsa D is an eeprom problem!

[Meat-Head]

Try leeching a pair of matching dumps

[MasterGav]

Try leeching a pair of matching dumps

Im lost ? leeching?

[MasterGav]

If i have a bin file for a GID and EHU if the pass codes are the same, will this work?

[shooting]

If i have a bin file for a GID and EHU if the pass codes are the same, will this work?

It should work, tho just plugging a display into your car will bring up errors, it'll need pairing with the car using Opcom/Tech2.
The way to get it to work is by unregistering your radio and pairing with your current display.

wbr

[tryplex92]

advice check mid can and variant config they need to bee the same i'm sure on Cd40usb midcan and variant config it's write Mobile phone present

LE: next time when someone ask you for help,help him http://www.digital-kaos.co.uk/forums...C-Needle-Sweep

[bank]

advice check mid can and variant config they need to bee the same i'm sure on Cd40usb midcan and variant config it's write Mobile phone present

It should be not only the same, but also the real. If there is no any mobile phone or bluetooth, it should be disabled.