I have a bit different numbers but might help.
did you resolve your problem? how?
mine starts after programming for the first time only. after turn off didnt crank anymore. sounds similar?
cheers
I need a flash, eprom, or full dump for Ford Transit SID209, because someting goes wrong with Kess by reading or writing and now vehicle is not starting anymore.
HW: CK4A-12B684-AC
Ver. HW EK31-14C204-FT
SW: EK31-12A650-FM
Imp.: CONTI_SID209_FRV_910
Thank you!!
Last edited by gsmflasch; 27th April, 2018 at 06:55 AM.
I have a bit different numbers but might help.
did you resolve your problem? how?
mine starts after programming for the first time only. after turn off didnt crank anymore. sounds similar?
cheers
Hello
Can anyone help with original file please?
HW: CK4A-12B684-AC
SW: EK31-12A650-FG
VIN nr.:
SW ver.: to be calibrated
Spare:
Engine:
Ver. HW:
SW upg.: EK31-14C204-FT
System: CONTI_SID209_FRV_7C0
thank you !
you need to disconnected battery for atleast 10mins after every read / write
2WD Dyno , Magpro2 X17, FLEX Master , KESS Master , AUTOTUNER Master, Byteshooter Master, EVC Winols Reseller
Official Magicmotorsport DistributorCode:FILESERVICE: Tuning / DPF / EGR / Adblue / DTC / Immo
Official Autotuner Distributor
Official Alientech Distributor
Bookmarks