Geely LC

[guillermoc]

Hello, now I have a Geely LC that is equal to the Gelly Cross, I have disarmed it and it has neither back nor forward memory or micro, it only remains to desolder the display that is welded in all its legs, someone can tell me if under the display are the km saved? Well I do not remove the solder from those pins, I appreciate your help in advance

[Dr. Zoidberg]

Hello, now I have a Geely LC that is equal to the Gelly Cross, I have disarmed it and it has neither back nor forward memory or micro, it only remains to desolder the display that is welded in all its legs, someone can tell me if under the display are the km saved? Well I do not remove the solder from those pins, I appreciate your help in advance

Maybe, inside has a atmega protected...

[guillermoc]

Hello Dr. Zoidberg, it was not necessary to desoldar the display, had two small screws holding the front plastic ring, the micro is S9S08LG32, I do not know this micro, I will look at the data tables, if you know how to read you tell me, thank you very much .

[Dr. Zoidberg]

Hello Dr. Zoidberg, it was not necessary to desoldar the display, had two small screws holding the front plastic ring, the micro is S9S08LG32, I do not know this micro, I will look at the data tables, if you know how to read you tell me, thank you very much .

VVDI say this (unsecured)


pinout vvdi UNSECURED..JPG

[guillermoc]

Upa v1.3 r2 he does not read it right?

[letalcrudo]

Upa v1.3 r2 he does not read it right?

I tried with Original UPA and no success ... if I were you I'd leave this model goes on

[guillermoc]

Thanks friend, I'm watching and I see that UPA in its latest version does not support it either, there are several freescale models of that family but this micro is not particularly, the programmer of Smok either because of what I read, vvdi of xhorse does, some more than can I access ?, thanks.