FIAT DUCATO 2012

**triak88** · 23rd May, 2018, 02:05 PM

CAN FVDI 2015 FIND PIN CODE,PRECODE AND PROGRAM TRANSPONDER FOR FIAT DUCATO 2012 .

BR

**autochei** · 23rd May, 2018, 02:17 PM

never..................

**TukoSalamanca2** · 23rd May, 2018, 04:37 PM

Originally Posted by autochei

never..................

what tool can do? 2012-2018?

**klesk1986** · 23rd May, 2018, 05:09 PM

ZedFull for sure, TMpro2 by BCM dump

**rob h** · 23rd May, 2018, 06:41 PM

Possible ioterminal by obd.
Check the NEC processor!

And tango by dump 95640

**rapidlocksmiths** · 23rd May, 2018, 09:05 PM

abrites original and zedfull will do these in minutes all obd

**rob h** · 23rd May, 2018, 11:41 PM

Smok uhds FT0013 Magneti Marelli Body Fiat MCU +95640 Read/Write EEprom , Read Flash , Read Pin Code

**lion0304** · 24th May, 2018, 05:47 AM

Truecode, look here: https://www.keyprogrammers.com/colle...re-update-fiat

**rapidlocksmiths** · 24th May, 2018, 09:15 AM

yes truecode as well will do this to make a standard key , if you have tmpro and the marelli licence you can also prepare the remote , truecode will then program this too

**lion0304** · 24th May, 2018, 10:54 AM

Originally Posted by rapidlocksmiths

yes truecode as well will do this to make a standard key , if you have tmpro and the marelli licence you can also prepare the remote , truecode will then program this too

I read this can also configure eeprom to save file. That can use for precode Transponder anf Remote key Tango, TMpro....

So for remote key, it will not work as it say?

*** Skeleton file is a manipulated .bin file, a ‘fake’ EEPROM file that contains the relevant info from the car that you are working on. This file can be loaded into any of the leading transponder production devices, and will be recognised as a Fiat Punto 93c86 file. With your transponder production device, you can then choose to create an ID46w or to create a pre-coded key/remote key. ***

**rapidlocksmiths** · 24th May, 2018, 12:16 PM

with regards ducato and fiat 500 true code does what it says it can do , it will read the file and it will program the key and the remote once they have been properly precoded , TMpro will precode the chip and the remote so that truecode can program them to the car , tango will only precode the chip tango will not prepare the remote .
with tmpro the marelli licence is needed for ducato and the delphi licence for fiat 500.

so truecode does exactly what it says it does , but getting a working remote will depend on the capability of your dump tool that you use to precode the key , most dump tools will precode the transponder but not many can also prepare the remote part for programming

truecode just reads and saves the file initially , what key you can prepare is then dtermined by the capability of your dump tool , truecode will then code in the prepared key , but the remote will only work if you have used a dump tool that can prepare the remote , tango cannot

so true code does exactly what it claims to do and very well , its excellent kit , truecode doesnt precode the chip or the remote though , your dump tool does this bit . but with the correct dump tool and licence true code is outstanding and does a great job

**lion0304** · 24th May, 2018, 10:33 PM

Originally Posted by rapidlocksmiths

with regards ducato and fiat 500 true code does what it says it can do , it will read the file and it will program the key and the remote once they have been properly precoded , TMpro will precode the chip and the remote so that truecode can program them to the car , tango will only precode the chip tango will not prepare the remote .
with tmpro the marelli licence is needed for ducato and the delphi licence for fiat 500.

so truecode does exactly what it says it does , but getting a working remote will depend on the capability of your dump tool that you use to precode the key , most dump tools will precode the transponder but not many can also prepare the remote part for programming

truecode just reads and saves the file initially , what key you can prepare is then dtermined by the capability of your dump tool , truecode will then code in the prepared key , but the remote will only work if you have used a dump tool that can prepare the remote , tango cannot

so true code does exactly what it claims to do and very well , its excellent kit , truecode doesnt precode the chip or the remote though , your dump tool does this bit . but with the correct dump tool and licence true code is outstanding and does a great job

Thank oyu mate for your experience.

I get the main point that file from Truecode cannot prepare working PCF7946 remote key with Tango.

This can start the engine but remote not work. For remote i'll need Tmpro MM module or other.