Try to recode just the original key and see if it comes back to life. If you have the pin and cs it should work with a force ignition tool or by jumping fuses
Sent from my SM-G930W8 using Tapatalk
Hi All.
Got a Q7, Made spare key with Zed Full, but something went wrong. Original key and new spare key both not working.
Got a fault in ELV that said somthing like Keys incorrectly coded.
Cleared all faults, and still not starting.
Dash shows 1/0 above odometer.
Cant read ELV by OBD any longer as ignition wont turn on.
Have pulled out ELV and read dumps from 9S12dg256 with vvdi prog (Attached).
Can someone please help? (Kinda urgent. You how customers can get)
Regards
J
Try to recode just the original key and see if it comes back to life. If you have the pin and cs it should work with a force ignition tool or by jumping fuses
Sent from my SM-G930W8 using Tapatalk
BigJ (15th June, 2018)
You can get it from the elv dump
I can check for you tonight. Will be a while though, hopefully somebody else can help before then
Sent from my SM-G930W8 using Tapatalk
BigJ (15th June, 2018)
reset batery.........
Dump recognized: OK
Programmed keys: 1
VIN: WAUZZZ4L87D096742
PIN: 63594
Last edited by autochei; 15th June, 2018 at 01:58 PM.
BigJ (15th June, 2018)
yes remove batery if still not working try co code back with pin code
Dump recognized: OK
Programmed keys: 1
VIN: WAUZZZ4L87D096742
PIN: 63594
BigJ (15th June, 2018)
no need strap u have allready pin
only put vcds vvdi and programing again one key
ur key it s not precoded ok
so the car it s in learning mode waitting second key to programing
BigJ (15th June, 2018)
BigJ (15th June, 2018)
Bookmarks