immo off mercedes sprinter

[alexandrosts]

ok thanks i will try it monday when i get back work.

[3inferno3]

car must start. I used this solution many times cheers

[alexandrosts]

Unfortunately did not start I am getting fault codes p1630 p1617 p1330

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[alexandrosts]

I wander if I missed something

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk

[3inferno3]

this solution is 100%! must be different problem than synchronization das = ecu. you must find whats happend.. start from read errors in system

[3inferno3]

p1330 is starter.............

[3inferno3]

did you verify after write??

[alexandrosts]

yes i did, actually i load the files 3 times on the mcu the 3rd time it verified ok i am thinking maybe the immo box has an issue , if i buy a used one with different numbers will it work if i flash it with the file you gave me or i need to find same maching numbers and reflash it ?

[3inferno3]

If immo box is broken buy next one or use emulator into ecu cr2 work fine

[alexandrosts]

Do I need to reflash original dump on the ecu eprom

Στάλθηκε από το SM-J320F μου χρησιμοποιώντας Tapatalk