Can anyone help me please ?????????
HI everyone, i have a mbz C class w202, year 2000, the original eis wont respond. i have a donor eis, with no key. i have read the eis of the original. now, this eis has 2 MCUs. i have only read the 1st one, the easy access. whats the repair procedure for this eis? besides using the donor, any other repairs i can perform? it has the hc705 1d69j. the key wont turn and eis has no communication. thanks in advance
Can anyone help me please ?????????
If you're pretty sure the original is defective, you're gonna have to copy both mcus to the donor. That's it. The original key should work .
Help. I am not getting this, I purchased a used Eis. Took both mcu 1 and 2, marked it, read it and wrote the original mcu info to the used ones. Tried it and no communication. Purchased another one. Did the same thing, again. I lost the communication. I am reading by xprog. Thank you
Any one?????? I'm stuck here
hi, the eis part numbers are the exact. i had another one, a 3rd one, and i have a communication with the eis but still wont turn and it has some fault codes, internal module fault, i think. and still the key wont turn
remove both lock from car test on bench
post result
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
Other solution. With your new eis. Read dumps. Make ecu virgin and program new key (only by programming chip in car original key
dd1 (18th July, 2018)
Are you able to tell how much current the switch draws when powered up, when key is inserted and when you attempt to turn it?
dd1 (18th July, 2018)
Bookmarks