..........
Ford focus cmax 2004
1,6TDCi 3m5a-12a650-JF (Updated to JH ?? )
0281011263
7KTF
Hi, i`ve a problem with mu mother`s in law car, won`t start. PATS code 23.
I`ve resolder the IC, checked wiring, and still can`t initialize IC to PCM via IDS . There is no outcode stored in the PCM.
I`ve connected PCM to Elmconfig on desk to eliminate wire problems, but when i try to write firmware there is error erasing memory and no go, also IDS can`t perform intital modul programming.
two keys were added to IC with no problem but cant synich IC-PCM
my electic told me to go to FORD AS but they told to bu new PCM wchich price is eqal to new car so i`m trying to fix this problem by myself and any help would be appreciated.
Conected PCM via BDM100 and here is what i`ve got:
..........
Last edited by kiszka; 24th December, 2018 at 11:21 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
IC dump via carprog
..........
Last edited by kiszka; 24th December, 2018 at 11:22 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
unfortunatly the same thing with new eeprom.no start, ID mismatch, no outcode.
hi
with forscan you can do it by obd
regards
You mean synchro ? Tried it using Vscan V3 STN1170, no luck. "Module returned false outcode". Same with IDS. Also i cant clear memory when trying to write firmware in ElmConfig, programable module instalatian in IDS ( error 0-0x22 851082 couldn`t find what it means). Tried with another IC, PCM - same thing. In another car which works (my brother has the same model) stil car wan`t start.
I`m trying to convince my brother to let me open his PCM and read full ecu dump and IC. then i will onlu reprogram key and hope the car will start, but he is affraid of his car being immobilized too
kiszka (6th July, 2018)
..........
Last edited by kiszka; 24th December, 2018 at 11:22 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
bolg (6th July, 2018)
car is starting without any problem thx kiszka
kiszka (7th July, 2018)
hello i have the some problem how you resolve it?you did synchro with forscan?thanks
Hi
if it does not work forscan ..
post your ecu and dash please?
Small circumstances produce great events : 02.47-tranquillité:
Thanks for answear i try also to synchro with ford all in one but not working either.<br>the dump are full dump by carprog.
Last edited by nbn; 23rd October, 2018 at 09:39 PM.
Hi
what are your engine fault codes?
Small circumstances produce great events : 02.47-tranquillité:
nbn (24th October, 2018)
..........
Last edited by kiszka; 24th December, 2018 at 11:22 AM.
Reality of life :
1:Never argue with an idiot, he will pull you down to his level and overcome you with experience
2:Envy is the confession of inferiority
3:Everyone lies
---------------------------------------------------------------
How much trash you leave behind so much trash someone will have to read or maybe you yourself
If you like reading garbage, don't slow down, just speed it up
hello my engine fault code in dash is B2139 and in ecu p1621.
Bookmarks