Ford CD6000 RDS EON wiring

[rimodar]

I need pinout to connect the radio on the workbench-tuner problem-tea6842.I connected pins 1-3(ACC+IGN) to +12V,pin 6 GND the radio is on but when code is entered it just resets and asks for the code again.The wire adapter is what i don`t have ,just soldered wires directly to connector but i think i`m one wire short(probably memory wire).Any help appreciated....

[masterskay62]

I need pinout to connect the radio on the workbench-tuner problem-tea6842.I connected pins 1-3(ACC+IGN) to +12V,pin 6 GND the radio is on but when code is entered it just resets and asks for the code again.The wire adapter is what i don`t have ,just soldered wires directly to connector but i think i`m one wire short(probably memory wire).Any help appreciated....

Hi.
..................

[treran21]

masterskaj62

gnd 2 pin and 6 pin
vcc 1 pin and 3 pin
( this Ford with st92 core )

[rimodar]

The back side connector has 3 segments-like from the link.The left conector top1-3 +12V.....before the last-6th from top GND.Just to be sure,maybe i missed number 2-didn`t check the conection to GND but in schematics it says ILL-.....

[treran21]

look post #3

[rimodar]

OK,we`ll see tomorrow,thanks!

.................................................. .........

Wiring is ok for the schematics from post #3 and the looks of a radio I posted.Thanks,once again....