bmw 5 & 7 SERIES HYBRID 2017

[sparkz02]

Hi,

Just after some more info on 5 /7 series 2017 plug in hybrid, So I'm guessing they'll have FEM/BDC can these be done OBD using VVDI2/DP4 etc? Or not all versions covered.

EEprom will require emulator?


Any info would be helpful.

Thanks,

[v-diag]

the bdc on these can not be done via obd? filters needed

[sws2011]

sure eep will need Emulator .. any 35160wt after 2016 require Emulator
FEM/BDC don't done Via OBD yet .. must open it and use BMW Explorer or VVDI2 ..

[sparkz02]

Thanks for your help guys. I'm sure dp4 has software out, if it works on these versions or not I'm unsure.

''We have released new software update for following car models:Hyundai Kona 2017 (model 2018) S&T Motiv (Traveo S6J300????) - programming via OBDII - Program nr 95BMW, ROLLS ROYCE - FEM Module – reset KM via OBDII and C12 - Program nr 88.

[Andrew Bincoder]

if dashboard is FULL LCD 12' made by bosch then you will not need eeprom emulator, even if it is 35128WT

BDC made by Lear or Continental?

If you have DP4 why don't you ask people from there for supported versions? I wish you luck but you should rather use some russian tools for BDC instead of DP4