doctore (13th August, 2018), PocketHero (14th August, 2018)
yeah but cover some plastic, tape or something it will scratch the car.
@super-jumbe i just opened recently a 2015 Ford Focus with rod. The only lock is partially damaged and the only key is in the trunk. 2 min job. In this case you have more options than lishi. If the key is keyless (like mine) you can push the start button with the rod and after the center switch or simply pull the door handle
I like the lishi but i like more my time
Sir, are you classified as human? Negative, I am a meat popsicle
doctore (13th August, 2018), PocketHero (14th August, 2018)
Maybe anyone has gathered some info by particular car. I mean unlocking methods?
I saw online dvd and books . Maybe you have in pdf or video formats.
Or any other interesting usefull info about emergency car unlocking,good tips,tricks etc
Renault ECU tool / IO terminal / A.S.W
drugowaz (18th August, 2018)
Is here anyone good in decoding locks with lishi?
I need some advice-info to what directions need to decode wafers after lock is picked.
I will do some photos on lishi with arrows you just by numbers tell up or dows,to or from engraved number on lishi.
Asking because watched some videos and i see diferent lock is decodd to diferent side. If somebody can advice write me pm
Example same lock decoding to oposite directions.
One video onwards egraved number other video from it. This i do t get it
https://youtu.be/ICygHk7d_8c
https://youtu.be/pHUN7RCAA9Q
Last edited by drugowaz; 20th August, 2018 at 07:41 AM.
Renault ECU tool / IO terminal / A.S.W
Example lock i have
Hu92
If decoding to direction of engraved number i have 32212221 if oposite direction 13123332
Renault ECU tool / IO terminal / A.S.W
Oh got it. Mine is single
Its same for all decoding 1 or 2 lifterss?
In video cy24 losk. Its single lifter and they decoding to opposite directions :/
Last edited by drugowaz; 20th August, 2018 at 09:18 AM.
Renault ECU tool / IO terminal / A.S.W
its really very simple to know which way to decode with each tool .
for decoding the tools are broken down into just 3 catagories ,
1) edge key tools ( for edge key locks )
2) single lifter high security/ laser track tools
3) multiple lifter high security/laser track tools , ie , 2 and 4 lifter laser track tools
so as a general rule to know which way to decode with a 2in1 or 3 in1 tool ;
1) edge key tools 1 and 2 lifter regardless all decode in the same direction as the lock is picked
2) single lifter laser track tools all decode in the opposite direction to picked
3) twin and quad lifter laser track tools all decode in the same direction as picked
it is that simple to know which way to decode with your tool , or if you prefer , to simplify further , all single lifter laser track tools decode in opposite direction , all other tools in same way as you picked .
Last edited by rapidlocksmiths; 20th August, 2018 at 10:12 AM.
This is i needed. Thank you very much!
Renault ECU tool / IO terminal / A.S.W
Playing with hu100 lock+key from china.
Key turn ok. But with lishi t8 cant open it.
All wafers is pulshed to cut no1 but it still wont turn try release tension etc beu wafers droping and need start from beggining.
Update after 2 hours finished open
Last edited by drugowaz; 30th August, 2018 at 01:09 PM.
Renault ECU tool / IO terminal / A.S.W
Can anyone from experience write to which direction lock is opened after picked on euro-usa cars to left (car front) or right (trunk side)
Vag-left
Bmw-left
Honda-right
Mercedes-
Toyota-
Lexus-
Nissan-
Chrysler didge jeep-
Kia-
PSA cars-
Ford-
Hyundai-
Fiat alfa lancia-
Mazda-
Opel-GM-
Other questuon about pick diference to lock or unlock position. Im noticed that theres huge diference to open lock to lock position. S
Now playing few hu64 one lock i can pick to any direction 20-40seconds. Cls 2007
Other hu64 i only can open to lock position fairly easy. But to open to unlock position can not go. Total maybe half day still cant open.
Is there any tips on this?
Last edited by drugowaz; 6th September, 2018 at 12:49 PM.
Renault ECU tool / IO terminal / A.S.W
here you goo hamer-hammer.jpg
just joke
Professional bmw key service cas 3/3+ 4/4+ repair = reset ews egs 8hp = 6hp-egs19d
This i will use to. Cars valued under 500euro
Renault ECU tool / IO terminal / A.S.W
Toyota/Lexus to trunk side (Clockwise)
Chrysler with vertical button to front (Counterclockwise)
Chrysler horizontal button to rear (CW)
GM to front CCW on most 4 door
Many variations after that, I use Steve Young's car opening book for general information on direction to pick.
As far as ease of picking, GM laser, Nissan and Toyota all seem to pick easier to locked position. Personal opinion on that.
drugowaz (6th September, 2018)
Maybe i overlearned lately one day i open lock in 20 sec. After few days i cant open SAME LOCK at all.
Today free time on hu92 my car. I was able to unlock it best time in 9-30sec . A week or two ago. Today triend again couldn open it at all this killing me.
Last vag hu66 with lishi in rush 5 min couldn open,lost patience took inner groove pick opened in 10sec.
I think if one day get skilled on one lock .later take other type locks you loose skill on previous lock open in same time.
Can anyone tell me what is mid door open time with lishi? Anyone pickingnit 10-20mins?
I watched multiply videos. Time 30sec upto 2 min.
Last edited by drugowaz; 6th September, 2018 at 02:18 PM.
Renault ECU tool / IO terminal / A.S.W
Bookmarks