Ducato remote 2007 programming

[rob h]

Hello guys,

Fiat ducato 2007
Smok failed to read immodata by obd.
Bsi is a bit difficult accesible.
They build in a suspension control box.
No keycodecard in the vehicle.


I can copy the id48 transponder, but also like to add a remote.
Do i need the pin code to program a remote?
This remote 71738117 / 71749494is in the keydiy menu.
Fiat Ducato (2006 - 2009)

Greetings Rob

[klesk1986]

You need pin to program remote. But Ducato remote is based on HCSxxx so you can try clone it I've heard that some clone it by universal rolling codes garage remotes from JMA or Silca

[rob h]

Thanks,

I will try this remote copy function.
My kd-x2 will arrive soon.

If this fails, i can always ask customer to get pin from dealer.

[ponty]

Avdi will pull the pin on these.

[key4man]

Hello, my friend
You will be able to clone the remote control if you have the original using the KD900 device not the software,I've already done some
Enters the device:

COPY & generate
special copy
Follow the instructions

[rob h]

Thanks guys,

I can do most Fiats up to 2018 with Smok uhds, i believe they cover about the same as ioterminal and Avdi.
Just not this one. And i dont have acces to a avdi to try this anymore.

So the cloning will be the way to go on this.

Avdi will pull the pin on these.

[rob h]

I tried cloning the remote a few times. Using kd-x2
it is not working. I tried different kd remotes versions.
The id48 cloning was good.
The owner will get the pin from from the dealer, so i can program a remote in!

Hello, my friend
You will be able to clone the remote control if you have the original using the KD900 device not the software,I've already done some
Enters the device:

COPY & generate
special copy
Follow the instructions

[szengen]

id 48 remote ducato stilo, programming with the same pin code, in another module