daewoo matiz immo off

[rokibar]

have matiz from 2001 with ecu kEMSCO D3 ENGINE 800ccl with immo problem. tried everything and the and tried with universal emmulator but no luck. i think ecu was stay in reset situation. can this caused problem or i need change flash content or similar? my first work with this ecu.
need little halp please.

[rokibar]

have matiz from 2001 with ecu kEMSCO D3 ENGINE 800ccl with immo problem. tried everything and the and tried with universal emmulator but no luck. i think ecu was stay in reset situation. can this caused problem or i need change flash content or similar? my first work with this ecu.
need little halp please.

does somebody have good original flash maybe?

[issam216]

picture of ecu and flash ref please

[rokibar]

need good original not reseted ecu flash. car from 2001 800ccl engine
ecu references:
daewoo ecu.jpg

[kiszka]

..........

[rokibar]

tried emmulator but car not start. want try with checked ecu flash.

[kiszka]

..........

[rokibar]

Was there a problem with immo for sure?
whether the reason for the problem with immo is another fault

when owner call me i seew 0 kes programmed in immo. after unsuccessed reprogramming keys via obd i was write manual booth original keys in imobox eeprom. nothing change. than i reset ecu and tried programming again but i think ecu stay in reset because when read tham have all FF. i put julie universal emmulator following instruction but car not start. short, it is car history.

[Shmortz]

Try this flash, it's from same type ECU and engine, use Julie or OF68 emulator without changing anything in flash.

[Meat-Head]

ON TOPIC:-

had a done to play with one, nothing could kill it once used genuine transponder chip

[rokibar]

closed. thanks all. i left this car.