P308 replace BSi problem

[MACKIE]

Hi,

have issue with replaced BSi on P308 y2010 1.6HDI.

Replaced BSi-virginise it, adaptation was succesfull (vin, keys, ecu-s...).
But now have error "Engine Faulty" and check engine blinking, everything other is working ok...

No errors in BSI, only one double error in ecu U1218-Intersystems CAN.

BSI Data:
Johnson Controls
9666647080
SW index:5.02
sw signature: 27.8B

ECu data:
Siemens SID 807
9678917680
sw index:255.255
sw signature: 00.00


Anybody have same problem?
Solution idea?

Regards
Mackie

[Zmann]

You use DiagBox but not PP2000 ? Look in full details of U1218 in ECU, if it point to gearbox ECU or ESP/ABS or BSI ?
What type of the gearbox ?

[MACKIE]

Solved,

it's not diagnostic problem, and I used Diagbox...
It's not about gearbox or ESP/ABS
it's all about incompatibility od fw in BSi and ECU.


Regards
Mackie

You use DiagBox but not PP2000 ? Look in full details of U1218 in ECU, if it point to gearbox ECU or ESP/ABS or BSI ?
What type of the gearbox ?

[Zmann]

I'm aware of this communication fault code and this can be found in Peugeot TSB (Technical Service Bulletin), that why my question was if the fault point back to a specific module in the CAN network.

Regards,

Solved,

it's not diagnostic problem, and I used Diagbox...
It's not about gearbox or ESP/ABS
it's all about incompatibility od fw in BSi and ECU.


Regards
Mackie

[t77]

Check cruize control telecoding

[MJRVR]

Check cruize control telecoding

I think he's sorted it.

[filxomor]

Solved,

it's not diagnostic problem, and I used Diagbox...
It's not about gearbox or ESP/ABS
it's all about incompatibility od fw in BSi and ECU.


Regards
Mackie

Hi mate
I have the same probleme
How you solved your probleme?

[ricked]

Hi mate
I have the same probleme
How you solved your probleme?

he dit say what the solution was:

"it's all about incompatibility of fw in BSi and ECU"