Fiat 500 abarth 2013 lost all keys

[Aljad90]

Hi

I have a fiat 500 abarth that I lost all keys what can I do ? Which programmer to use ??

Bcm 68193351AD

Thanks

[p1et]

All by OBD AVDI, Zed-Full. Lonsdor probably also.

By dump TMpro2, Miraclone. Also Tango but it cannot precode remote, only transponder.

[Aljad90]

All by OBD AVDI, Zed-Full. Lonsdor probably also.

By dump TMpro2, Miraclone. Also Tango but it cannot precode remote, only transponder.

Is there a separate eeprom inside the bcm or is it mcu?

Sent from my WAS-LX1A using Tapatalk

[p1et]

Well 2013 might be new type NEC BSI and if so, then only OBD solution. Older type have 93c86 inside. You must open BSI and check which type you have. But no matter which you got, the OBD tools mentioned by me above will work.

[rob h]

Obd, Smok uhds or io terminal.

[Aljad90]

Hi

This is the bcm , I think there is no eeprom so I have tp do obd? Or there is other way?

8 pin :4175sga front
42665-1 back

Sent from my WAS-LX1A using Tapatalk

[p1et]

Blue connector = new type with NEC so only OBD.

[rob h]

http://www.digital-kaos.co.uk/forums/showthread.php/532640-Fiat-500-year-2012-BC-Delphi-MCU-70f3632-all-lost-keys