6bytes not enough. Its bcm2 car. Itcould be as a6 c7 akl need bmc dump and elv dump
Hi, i have the CS PIN and MAC from edc17 ecu
i input those 6 bytes and pin in ezs via AVDI, it lets me read VIN ID and also Key adaptation (login OK) but i cannot prepare dealer key, while reading ecu it gives up, any ideas how to go from here
thanks
"I always tell the truth. Even when I lie"
"We Taking Over, One City At A Time"
6bytes not enough. Its bcm2 car. Itcould be as a6 c7 akl need bmc dump and elv dump
Renault ECU tool / IO terminal / A.S.W
z786 (21st September, 2018)
You could read the elv. J518
A bit of work getting it out.
You can load dump in avdi and get the 7 bytes.
There should be a dealer key option, or key to dump.
e8 transponders or org remote.
Try this dump:
http://www.digital-kaos.co.uk/forums...highlight=j518
Last edited by rob h; 20th September, 2018 at 08:47 PM.
doctore (20th September, 2018), lion0304 (8th May, 2019), PocketHero (26th September, 2018), z786 (21st September, 2018)
So this is old type key or bcm2 key?
Renault ECU tool / IO terminal / A.S.W
z786 (21st September, 2018)
I know elv has to be read. But I was being lazy mate. I've done a6 2008 and 6 bytes and pin did the trick
"I always tell the truth. Even when I lie"
"We Taking Over, One City At A Time"
Its banana or smart key
Renault ECU tool / IO terminal / A.S.W
Normally flip key mate
"I always tell the truth. Even when I lie"
"We Taking Over, One City At A Time"
2009 and up with 256kb module can not be done with 6 bytes only. Has to have EVL dump if you do not have key form delaer.
If you buy key form dealer, you can learn it with 6 bytes.
Also if EVL was replaced by Dealer in early models it will have module form 2009 and it will be same. Happen to me , had 2007 A6 and could not do it with out EVL dump.
amigokola (22nd September, 2018)
Last edited by super jumbe; 22nd September, 2018 at 10:45 AM.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
z786 (22nd September, 2018)
This is the download pdf link it explains clearly how to program new key and lost keys.
http://www.smelecom.com/down/VW%20IM...20function.pdf
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Thanks buddy. I know the manual procedure just looking 4 short cut
"I always tell the truth. Even when I lie"
"We Taking Over, One City At A Time"
When car don't go to dealer anymore for keys just change immo data in ezs and gearbox for new one where you will know all 12byte and learn this key. With vvdi very easy, smok possible to without big problems but litter more dump playing.
Bookmarks