peugeot 207 BSI replacement

[kristofer]

Hi. I need to replace the module BSI because I don't have communication with the steering wheel module, with the airbag, with power steering and the car does not start. after replacing the module everything is ok but the immobilizer is blocking it. So my question is what I need to do to make the car start on the new module bsi . is enough to copy eeprom 95128?
new bsi i have with identical numbers

[issam216]

normaly it's enough good luck

[Zmann]

Some possibility they have different sw version even same number anyway you can try BUT backup the eep in safe place. If failed, there are two ways to proceed, virginise the eep and start coding from scratch with known PIN or cloning 9s12DP512 4L00M if you have a programmer.

[kristofer]

this is dump from my bsi . it this bsi auto no start, I dont have communication for airbag , wheel module , Power steering and abs
it seems to me that the file is damaged but maybe someone will help me

[kristofer]

i add dump but file is empty

[issam216]

post your new bsi eeprom to virginse it and recode it with your original bsi pin and if need change your vin too

pin is : S82Y or reverse Y28Y
VIN : VF3WU5FWC34122685

for this file i send you original bsi file virgin attached

[kristofer]

i try this and report

[kristofer]

post your new bsi eeprom to virginse it and recode it with your original bsi pin and if need change your vin too

pin is : S82Y or reverse Y28Y
VIN : VF3WU5FWC34122685

for this file i send you original bsi file virgin attached

what is pasword ?

[kristofer]

oki. i have

[kiszka]

..........

[kristofer]

Hi. when I enter the code, I get the information that the code saved in the module is difrent from the code that I enter

[kristofer]

I try S82Y and Y28S

[kristofer]

ok. car start. everything is ok. thanks for your help

[kiszka]

..........