I have made some. They were all ok.
Upload pictures, of the correct and incorrect key.
Hi people
Today I had a problem with a keydiy hu83 blade..
I cut the key and did not fit in the door lock. Just did not went entirely inside the lock. Tried to force it but no luck.
In the ignition worked well..
After that I've cutted a China key and everything fine..
Car was Peugeot 308 year 2008.
Anyone had this issue?
I could find only one kind of hu83 keydiy.
Thanks
Inviato dal mio HTC 10 evo utilizzando Tapatalk
I have made some. They were all ok.
Upload pictures, of the correct and incorrect key.
comizelu (13th October, 2018)
sometimes i have also issues with keydiy blades,last time was with a va2,cut then a silca fh and was all ok,needs a bit of modification to fit in plus 3x the money but those works great every time.
comizelu (14th October, 2018)
Same here the only blade from key diy i had problem with was va2 other than that all good so far.
Mabe the blade that you used was a faulty one.
Sent from my SM-G925F using Tapatalk
Most likely bad cut of the tip.
If insertion in doorlock is bad.
I measured the keydiy batch, the are all fine.
comizelu (15th October, 2018)
Suzuki and mazda blades are similar but different on the tip you should grind it a bit
comizelu (15th October, 2018)
Bookmarks