Dump GID Astra H Ident BM

[bank]

Have the same GlobalTis version but without success. May be because my KP has older version of SW

[ArbeGTC]

Maybe the Hardware 3.0 beens too old. try upgrade with the original eeprom to GD59 (shoud be sucessfuly), then change to BM and test again. I have upgrade a GID in Hardware 3.0 and 3.20 to GD59 and OK. i want try upgrade 3.0 and 3.20 to GD83. I have some GIDs 3.0 and 3.20 for try.

bh17i0.jpgofa7o0.jpg

[bank]

Today is not “my day”
Doesn’t work work for me

[ArbeGTC]

Today is not “my day”
Doesn’t work work for me

i will try upgrade the GID HW version 3.0 and 3.2 to GD83 in some days and post the results.

[bank]

I'll try today with hw5 SE

[bank]

Here is report for SE GID


SE successfully updated to SW83.
It has 3 line in cdc40 mode, but still 2 line in cd30 mode


Also it has a bug in 0-consumption
Check with 005 and 009 code indexes

[ArbeGTC]

Here is report for SE GID


SE successfully updated to SW83.
It has 3 line in cdc40 mode, but still 2 line in cd30 mode


Also it has a bug in 0-consumption
Check with 005 and 009 code indexes

nice.

in 3 line mode 0-consumption works ok?

[bank]

try upgrade with the original eeprom to GD59 (shoud be sucessfuly)

Without success

[bank]

In 3 line mode 0-consumption works ok?

The same

[bank]

try upgrade with the original eeprom to GD59 (shoud be sucessfuly), then change to BM and test again.

Upgrade to GD59 doesn't work for me but problem with old hardware is solved.
Both KP and SE are upgraded.
0 Consumption shows 30+L/100 for both displays, but may be it's need to drive some distance to calculate correct consumption

[budata]

Hello, 2 or 3 line information in eeprom is stored ?

[ArbeGTC]

Upgrade to GD59 doesn't work for me but problem with old hardware is solved.
Both KP and SE are upgraded.
0 Consumption shows 30+L/100 for both displays, but may be it's need to drive some distance to calculate correct consumption

upgraded the HW 3.0 to gd83 successfully?
then, the 0 Consumption, works fine after drive some ditance? or have not you tried it?

Hello, 2 or 3 line information in eeprom is stored ?

The eeprom only store Carpass or delivery state, code index, vin number, product number, alpha code, the variant configuration and some more config.
for the screen shows two or three lines, depends of the firmware version. (Not stored in the eeprom 93c66 is in another chip of the gid)

[bank]

upgraded the HW 3.0 to gd83 successfully?
then, the 0 Consumption, works fine after drive some ditance? or have not you tried it?

Yes, thats right.

[bank]

Hello, 2 or 3 line information in eeprom is stored ?

It stores in flash, not in eeprom

[budata]

Only GlobalTis can do that ?