POLO 2014 ALL KEYS LOST

**super jumbe** · 16th October, 2018, 07:52 AM

Any one-programmed polo 2014 all keys lost, AVDI not recognizing, checked chip on dash big chip, has any one done lost keys any help very much appreciate.

**godfathertre** · 16th October, 2018, 10:47 AM

have you got handy baby obd assistant i think this can be done with it i have not tried myself but no risk if you have it .

**Carkeysa** · 16th October, 2018, 11:38 AM

I've come across some 2014 VWs which have MQB clusters so can't do all keys lost

**CarCity** · 16th October, 2018, 12:56 PM

Originally Posted by super jumbe

Any one-programmed polo 2014 all keys lost, AVDI not recognizing, checked chip on dash big chip, has any one done lost keys any help very much appreciate.

If you can extract CS and PIN from ECU, then install VDO cluster, synchonize , and add key
This is PQ car , not MQB

**H2Deetoo** · 17th October, 2018, 06:46 AM

Any proper tool with suitable license should be able to read immo data from Polo 2014 PQ.
Then the next step is learning new transponders, also no issue normally.

**paulsta** · 17th October, 2018, 08:15 AM

Originally Posted by super jumbe

Any one-programmed polo 2014 all keys lost, AVDI not recognizing, checked chip on dash big chip, has any one done lost keys any help very much appreciate.

24c64 under the clocks?

**H2Deetoo** · 18th October, 2018, 06:34 AM

2014 Polo PQ should be 24C64.

**CarCity** · 18th October, 2018, 07:50 AM

Originally Posted by H2Deetoo

2014 Polo PQ should be 24C64.

2014 Polo is eeprom less

**super jumbe** · 18th October, 2018, 08:11 AM

I did opened the cluster and I did not see 24c64 chip but I saw this big MQB chip and no tool has software to extract information at this stage, look I can not risk on theories I need to see some one succeeded programming lost keys, and handy baby asking for working keys on stage 2, as far as I have been told only dealers...

**Fallen** · 18th October, 2018, 12:32 PM

2014 6R polo with VDO cluster can be done.
Remove cluster, remove LCD screen and 24c64 will be under there.

**qeso705** · 18th October, 2018, 08:14 PM

When door lock have key hole horizontal then its 2015 model. When vertical you can do like 2013 without any issue.

**H2Deetoo** · 19th October, 2018, 07:39 AM

Polo PQ cluster always has 24C64!
Polo MQB cluster hasn't got eeprom!

Please be specific and post full partnumber and SW version (or picture of label)

**super jumbe** · 19th October, 2018, 10:44 AM

Originally Posted by qeso705

When door lock have key hole horizontal then its 2015 model. When vertical you can do like 2013 without any issue.

Yes door lock key hole was horizontal 2015 model even key blades are smaller then the 2013-14 polo and I still can not even find new blades for that car let along programme keys.

**Hugh91** · 19th October, 2018, 11:34 AM

Originally Posted by super jumbe

Yes door lock key hole was horizontal 2015 model even key blades are smaller then the 2013-14 polo and I still can not even find new blades for that car let along programme keys.

Blades are Silca HU162T futura can cut them with correct adapter jaws maybe some other key machine also.

I have done AKL on 2014 Polo with AVDI service mode by dump, after SuperVag failed to put into service move with pogo pin. However, the one I did was on HU66. Sounds like this one is MQB?

Can you post a pic of rear PCB of cluster?