have you got handy baby obd assistant i think this can be done with it i have not tried myself but no risk if you have it .
Any one-programmed polo 2014 all keys lost, AVDI not recognizing, checked chip on dash big chip, has any one done lost keys any help very much appreciate.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
have you got handy baby obd assistant i think this can be done with it i have not tried myself but no risk if you have it .
I've come across some 2014 VWs which have MQB clusters so can't do all keys lost
super jumbe (18th October, 2018)
Any proper tool with suitable license should be able to read immo data from Polo 2014 PQ.
Then the next step is learning new transponders, also no issue normally.
2014 Polo PQ should be 24C64.
I did opened the cluster and I did not see 24c64 chip but I saw this big MQB chip and no tool has software to extract information at this stage, look I can not risk on theories I need to see some one succeeded programming lost keys, and handy baby asking for working keys on stage 2, as far as I have been told only dealers...
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
2014 6R polo with VDO cluster can be done.
Remove cluster, remove LCD screen and 24c64 will be under there.
doctore (18th October, 2018), paul_12345 (18th October, 2018)
When door lock have key hole horizontal then its 2015 model. When vertical you can do like 2013 without any issue.
p1et (18th October, 2018), super jumbe (19th October, 2018)
Polo PQ cluster always has 24C64!
Polo MQB cluster hasn't got eeprom!
Please be specific and post full partnumber and SW version (or picture of label)
rob h (19th October, 2018)
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously.
Blades are Silca HU162T futura can cut them with correct adapter jaws maybe some other key machine also.
I have done AKL on 2014 Polo with AVDI service mode by dump, after SuperVag failed to put into service move with pogo pin. However, the one I did was on HU66. Sounds like this one is MQB?
Can you post a pic of rear PCB of cluster?
bianchi 994 with new software also cuts keys
Bookmarks